Effect of High-energy Ball milling to Powders on Microstructure and Physical Properties of Al-50Si alloy

被引：0

作者：

Zhang, Lijun ^{[1
]}

Xie, Jingpei ^{[1
]}

Wang, Aiqin ^{[1
]}

机构：

[1] Henan Univ Sci & Technol, Sch Mat Sci & Engn, Luoyang 471003, Peoples R China

来源：

ADVANCED ENGINEERING MATERIALS II, PTS 1-3 | 2012年 / 535-537卷

关键词：

high-energy ball milling; Al-50Si alloy; physical properties;

D O I：

10.4028/www.scientific.net/AMR.535-537.18

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Al-50Si can be fabricated with a method in which air-atomization is followed by vacuum canning hot-pressing process. In order to improve the mechanical character and the physical property, the treatment of high-energy milling are used in the pretreatment of the powder of Al-50Si. The microstructure, density,coefficient of thermal expansion are analyzed by scanning electron microscope(SEM) and thermal physical tester. It was found that the silicon grain was refined, the density and strength was improved when high silicon alloy powders were treated by high-energy ball milling.

引用

页码：18 / 22

页数：5

共 50 条

[1] The microstructure and properties of fine crystalline Al-50Si alloy prepared by high-energy ball milling
MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Science, Xi'an Jiaotong University, Xi'an 710049, China
[J]. Cailiao Yanjiu Xuebao, 2009, 5 (495-499):
[2] High-energy ball milling and characterization of Al-Si alloy powders
School of Materials Science and Engineering, Central South University, Changsha 410083, China
[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban), 2008, 1 (29-34):
[3] Effect of milling pretreatment to powders on microstructure and physical properties of Al-Si alloy materials
Yang, Fuliang
Yi, Danqing
[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2009, 45 (01): : 253 - 257
[4] Effect of Ball Size on the Microstructure and Morphology of Mg Powders Processed by High-Energy Ball Milling
Rios, Jesus
Restrepo, Alex
Zuleta, Alejandro
Bolivar, Francisco
Castano, Juan
Correa, Esteban
Echeverria, Felix
[J]. METALS, 2021, 11 (10)
[5] Effect of high-energy ball milling on the Mg alloy powders under alcohol protection
Li, Gang
Liu, Xingxing
Guo, Qi
Tang, Jianren
Yan, Biao
[J]. PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 785 - +
[6] Preparation of nanocrystalline magnesium alloy powders by high-energy ball milling
Wang, Heng
Hu, Lianxi
Chen, Xianjue
Wang, Erde
[J]. Fenmo Yejin Jishu/Powder Metallurgy Technology, 2008, 26 (06): : 403 - 406
[7] Effect of nonstoichiometry of NbCy and TaCy powders on their high-energy ball milling
Kurlov, A. S.
Gusev, A. I.
[J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 46 : 125 - 136
[8] Characteristics of nanostructured Fe-33 at.%Si alloy powders produced by high-energy ball milling
Kim, Se-Hoon
Lee, Young Jung
Lee, Baek-Hee
Lee, Kyu Hwan
Narasimhan, K.
Do Kim, Young
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 424 (1-2) : 204 - 208
[9] Effect of high-energy ball milling on the microstructure and properties of ultrafine gradient cemented carbides
Zhou, Xiangkui
Wang, Renru
Li, Chensi
Wang, Xiaobin
Wang, Kai
Wang, Qiang
[J]. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (05) : 2298 - 2306
[10] Effect of High-energy Ball milling on Microstructure and Microwave Absorbing Properties of NdFe Material
Lin, Peihao
Wang, Lei
Pan, Shunkang
Wan, Huamei
[J]. ADVANCED MATERIALS AND PROCESSES, PTS 1-3, 2011, 311-313 : 1281 - 1285

← 1 2 3 4 5 →