Tribocorrosion reactions between metal-on-metal and metal-on-polymer surfaces for total hip replacement

被引：5
|
作者：
Hesketh, James [1 ]
Hu, Xinming [1 ]
Dowson, Duncan [1 ]
Neville, Anne [1 ]
机构：
[1] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, W Yorkshire, England
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY | 2012年 / 226卷 / J6期
关键词：
Metal-on-metal; metal-on-polymer; depassivation; total hip replacement; cobalt chromium; ION RELEASE; JOINT REPLACEMENT; BEARING SURFACES; TIME-DEPENDENCE; CORROSION; WEAR; BIOTRIBOCORROSION; PROSTHESES; IMPLANTS; ARTHROPLASTIES;
D O I：
10.1177/1350650112442471
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The open circuit potential and linear polarisation resistance were measured during pin-on-plate tribometer tests for three different total hip replacement bearing material combinations in 0.35% NaCl and bovine serum solutions. In addition, surface analysis was performed using laser interferometry and focused ion beam scanning electron microscopy. It was found that the level of tribologically enhanced corrosion taking place at the bearing surface was substantially higher for metal-on-metal tribocouples than metal-on-polymer ones. Tribological depassivation may be reduced by the presence of organic boundary lubricants.
引用
收藏
页码：564 / 574
页数：11
相关论文
共 50 条
  • [1] Metal-on-metal total hip replacement
    Silva, M
    Heisel, C
    Schmalzried, TP
    [J]. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH, 2005, (430) : 53 - 61
  • [2] Dislocation after total hip replacement in relation to metal-on-metal bearing surfaces
    Clarke, MT
    Lee, PTH
    Villar, RN
    [J]. JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME, 2003, 85B (05): : 650 - 654
  • [3] Outcomes of a metal-on-metal total hip replacement system
    Matharu, G. S.
    Theivendran, K.
    Pynsent, P. B.
    Jeys, L.
    Pearson, A. M.
    Dunlop, D. J.
    [J]. ANNALS OF THE ROYAL COLLEGE OF SURGEONS OF ENGLAND, 2014, 96 (07) : 530 - 535
  • [4] A tribological study of metal-on-metal total replacement hip joints
    Dowson, D
    Goldsmith, AAJ
    McNie, CM
    Smith, SL
    [J]. FRICTION, LUBRICATION, AND WEAR OF ARTIFICIAL JOINTS, 2003, : 41 - 58
  • [5] Contact mechanics of a novel metal-on-metal total hip replacement
    Besong, AA
    Lee, R
    Farrar, R
    Jin, ZM
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2001, 215 (H6) : 543 - 548
  • [6] Comparison of contact mechanics between a total hip replacement and a hip resurfacing with a metal-on-metal articulation
    Liu, F
    Udofia, IJ
    Jin, ZM
    Hirt, F
    Rieker, C
    Roberts, P
    Grigoris, P
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2005, 219 (07) : 727 - 732
  • [7] Metal-on-Metal Total Hip Arthroplasty
    Kim, Raymond H.
    Dennis, Douglas A.
    Carothers, Joshua T.
    [J]. JOURNAL OF ARTHROPLASTY, 2008, 23 (07): : 44 - 46
  • [8] Metal-on-metal total hip replacement - What does the literature say?
    Dumbleton, JH
    Manley, MT
    [J]. JOURNAL OF ARTHROPLASTY, 2005, 20 (02): : 174 - 188
  • [9] Metal-on-Metal Total Hip Arthroplasty
    Malviya, Ajay
    Ramaskandhan, Jayasree
    Holland, James P.
    Lingard, Elizabeth A.
    [J]. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME, 2010, 92A (07): : 1675 - 1683
  • [10] Predictive role of the Λ ratio in the evaluation of metal-on-metal total hip replacement
    Affatato, S.
    Spinelli, M.
    Zavalloni, M.
    Leardini, W.
    Viceconti, M.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2008, 222 (H5) : 617 - 628
12345