3D In Situ Imaging of Aluminium Alloys During Solidification

被引:4
|
作者
Salvo, L. [1 ]
Lhuissier, P. [1 ]
Scheel, M. [2 ]
Terzi, S. [1 ,3 ]
Di Michiel, M. [2 ]
Boller, E. [2 ]
Taylor, J. A. [4 ]
Dahle, A. K. [3 ]
Suery, M. [1 ]
机构
[1] Univ Grenoble CNRS, Lab SIMAP GPM2, St Martin Dheres, France
[2] ESRF, Grenoble, France
[3] Univ Queensland, ARC Design Light Met, Brisbane, Qld, Australia
[4] Univ Queensland, CAST CRC, Sch Mech & Min Engn, Brisbane, Qld, Australia
关键词
Solidification; Aluminium alloys; Intermetallics; In situ X-ray tomography; MICROTOMOGRAPHY; MICROSTRUCTURE; TOMOGRAPHY; NUCLEATION; IRON;
D O I
10.1007/s12666-012-0218-6
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
X-ray tomography has become a widely used 3D characterisation technique in materials science either using laboratory tomographs or large X-rays facilities. The advantage of large X-rays facilities is the high photon flux which allows fast tomography to be performed. With fast acquisition CCD cameras, it is possible to obtain a 3D image of the material in less than 30 s with a spatial resolution of the order of 1 or 2 mu m. We will show that this allows to study the influence of copper addition on the formation of intermetallics formation in Al-Si-Fe-Cu alloys: we will show that copper seems to have beneficial effects. With CMOS cameras it is possible to reduce acquisition times down to values of about 0.15 s. We will show that this allows to obtain in situ 3D information on the early stage of solidification in aluminium alloys, only accessible up to now using radiography : the solidification front rate was measured on several individual dendrites an Al-20wt%Cu alloy and estimated to be around 10 mu m/s.
引用
收藏
页码:623 / 626
页数:4
相关论文
共 50 条
  • [1] 3D In Situ Imaging of Aluminium Alloys During Solidification
    L. Salvo
    P. Lhuissier
    M. Scheel
    S. Terzi
    M. Di Michiel
    E. Boller
    J. A. Taylor
    A. K. Dahle
    M. Suéry
    [J]. Transactions of the Indian Institute of Metals, 2012, 65 : 623 - 626
  • [2] 3D microstructure development during unconstrained solidification of aluminum alloys
    Ruvalcaba, D.
    Eskin, D. G.
    Katgerman, L.
    [J]. PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 : 1015 - +
  • [3] 3D microstructure reconstruction of aluminum alloys quenched during solidification
    Ruvalcaba, D.
    Eskin, D.
    Katgerman, L.
    [J]. ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 1707 - 1712
  • [4] Partitioning of titanium during solidification of aluminium alloys
    Easton, MA
    StJohn, DH
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2000, 16 (09) : 993 - 1000
  • [5] Intermetallic selection during solidification of aluminium alloys
    O'Reilly, K
    [J]. SOLIDIFICATION AND CASTING, 2003, : 257 - 270
  • [6] Shrinkage during the solidification of aluminium alloys.
    Stott, VH
    [J]. JOURNAL OF THE INSTITUTE OF METALS, 1936, 59 : 73 - 82
  • [7] Thermal contraction during solidification of aluminium alloys
    Eskin, D. G.
    Katgerman, L.
    [J]. ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 1681 - 1686
  • [8] Necessity of investigating microstructure formation during directional solidification of transparent alloys in 3D
    Bergeon, N
    Trivedi, R
    Billia, B
    Echebarria, B
    Karma, A
    Liu, S
    Weiss, C
    Mangelinck, N
    [J]. LOW GRAVITY PHENOMENA AND CONDENSED MATTER EXPERIMENTS IN SPACE, 2005, 36 (01): : 80 - 85
  • [9] Solidification of aluminium alloys
    Ciach, R
    Podosek, M
    [J]. ADVANCED LIGHT ALLOYS AND COMPOSITES, 1998, 59 : 201 - 206
  • [10] Deformation behavior during solidification of steels and aluminium alloys
    Nakagawa, T
    Suvanchai, P
    Okane, T
    Umeda, T
    [J]. SOLIDIFICATION AND GRAVITY, 1996, 215 : 377 - 384