EFFECTS OF BLADE-END OPEN RATIO ON AERODYNAMIC PERFORMANCE OF MULTI-BLADE FAN

被引:0
|
作者
Lee, Ho Ho [1 ]
Choi, Hang Cheol [1 ]
Jung, Jae Gu [1 ]
Lee, Yoon Pyo [1 ]
Shin, Youhwan [1 ]
Chung, Jin Taek [1 ]
机构
[1] Korea Univ, Dept Mech Eng, Energy Mech Ctr, KIST, Seoul, South Korea
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper is studied to the performance characteristics and the flow behavior of multi-blade fan according to blade-end open-ratio (k) of near the shroud side. Firstly, the properties related to performance of the fan have been measured in a test rig. In the next, numerical calculations are conducted to explain the complex, three-dimensional flow behavior and performance of the fan using CFX 12.0 commercial code. The validation of numerical results has been performed in comparison with the experimental results. The numerical results provide a comprehensive understanding of the flow behavior inside the fan. By changing the open ratio of blade-end near the shroud side, the flow behavior and inactive zone is respectively different. The separated flows are strongly occurred in a blade passage and the inactive zones are formed near the shroud as k = 0 and 20% cases, relatively. The flow separation and inactive zone reduce fan's efficiency because they cause internal loss. The best efficiency and flow behavior of the fan is appeared to be at k = 70% case. According to open ratio of blade-end near shroud side, the flow behavior can be changed and the efficiency of a fan can be increasing. The objective of this study is to understand of the complex flow behavior inside the fan and offer guidance for fan designing.
引用
收藏
页码:497 / 504
页数:8
相关论文
共 50 条
  • [1] Effects of S-type Bionic Blade on Aerodynamic Performance of Reversible Multi-blade Centrifugal Fan
    Liu, Yang
    Xu, Zi-Qian
    Zhang, Yi-Yun
    Liu, Xiao-Min
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2021, 42 (11): : 2841 - 2848
  • [2] Study on the Effects of Concave Volute Tongues on Aerodynamic Performance and Noise of a Multi-Blade Centrifugal Fan
    Liu X.
    Wei M.
    Yang L.
    Qiao Y.
    2017, Xi'an Jiaotong University (51): : 128 - 135
  • [3] Research on the effect of inclined blade on performance of multi-blade centrifugal fan
    Wang, Jia-Bing (hustwjb@126.com), 1600, Science Press (37):
  • [4] PERFORMANCE IMPROVEMENT OF MULTI-BLADE CENTRIFUGAL FAN BY USING OPTIMAL BIONIC BLADE
    Liu, Xiaomin
    Wang, Xing
    Tang, Hu
    Xi, Guang
    PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 8, PTS A-C, 2012, : 1833 - 1842
  • [5] Responsiveness of Grouping Optimization Design of Multi-Blade Centrifugal Fan to Aerodynamic Performance of Fan Coil Unit
    Liu Y.
    Liu X.
    Chen Z.
    Xi G.
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2022, 56 (07): : 156 - 167
  • [6] Flow Control Mechanism of Blade Tip Bionic Grooves and Their Influence on Aerodynamic Performance and Noise of Multi-Blade Centrifugal Fan
    Xu, Ziqian
    Liu, Xiaomin
    Liu, Yang
    Qin, Wanxiang
    Xi, Guang
    ENERGIES, 2022, 15 (09)
  • [7] Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan
    Wei, Y.
    Wang, J.
    Xu, J.
    Wang, Z.
    Luo, J.
    Yang, H.
    Zhu, Z.
    Zhang, W.
    JOURNAL OF APPLIED FLUID MECHANICS, 2022, 15 (03) : 901 - 916
  • [8] Effect of impeller structure on aerodynamic performance and noise reduction of a small multi-blade centrifugal fan
    Bai, Minkai
    Liu, Zhan
    Ling, Yunzhi
    Tan, Haihui
    SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT, 2024, : 563 - 578
  • [9] Numerical Study on the Effect of Elliptical Inlet Nozzle on the Aerodynamic Performance of Multi-Blade Centrifugal Fan
    Qu, Hao
    Liu, Xiao-Min
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2019, 40 (08): : 1793 - 1798
  • [10] Numerical Simulation and Experiment Research on Aerodynamic Characteristics of a Multi-Blade Centrifugal Fan
    Zhang, Yongchao
    Chen, Qingguang
    Zhang, Yongjian
    Jia, Xiangxing
    EQUIPMENT MANUFACTURING TECHNOLOGY AND AUTOMATION, PTS 1-3, 2011, 317-319 : 2157 - 2161