Study on Water Vertical Infiltration Characteristics and Water Content Simulation of Sandstone Overlying Loess

Research on the infiltration characteristics of surface water is fundamental for understanding the entire hydrological process. Therefore, studying the water infiltration process of sandstone slopes overlaid with loess and predicting soil moisture content are of great importance for investigating hydrological processes and controlling soil erosion in the hilly and gully areas of the Loess Plateau in China. This study mainly focuses on the simulation of the vertical water infiltration characteristics and water movement patterns of four kinds of sandstone (feldspathic and argillaceous sandstone) structures covered with thin layers of loess. In the one-dimensional vertical infiltration experiment and Hydrus-1D model simulation, the interlayer transition planes of loess-feldspathic and loess-feldspathic-argillaceous sandstones were found to present two conditions: fine soil covering coarse soil and coarse soil covering fine soil. Therefore, water infiltration reduced permeability. The existence of a transition layer between loess and feldspathic sandstone decreased the water infiltration rate and infiltration amount and decelerated the speed of the wetting front, thereby further affecting the ability of water infiltration. By using the Hydrus-1D model, 15 sets of soil hydraulic parameters, including theta x (0.028-0.05795 cm(3)/cm(3)), theta s (0.2306-0.4786 cm(3)/cm(3)), alpha (0.01899-0.06071 cm(-1)), n (1.438-6.408), and Ks (1.96 center dot 10(-4)-0.0576 cm/s) were inverted and optimized for each 20 cm soil layer (total of 60 cm). The Van Genuchten model constructed using these parameters demonstrated high accuracy in the simulation of water content in the vertical infiltration process of sandstone covered by loess with the coefficient of determination R-2 > 0.849 and relative error RE < 5.311.