Effect of the Deoxidation Conditions on the Titanium Loss During Electroslag Remelting of Corrosion-Resistant Titanium-Alloyed Steel Under AKF235 Flux

被引：2

作者：

Amezhnov, A. V. ^{[1
]}

Kutorkina, V. A. ^{[1
,2
]}

Levkov, L. Ya. ^{[3
]}

Baklanova, O. N. ^{[1
]}

Pavlov, A. A. ^{[1
]}

Sobolev, A. V. ^{[4
]}

Balashov, S. A. ^{[4
]}

Yakovleva, P. S. ^{[1
]}

Rodionova, I. G. ^{[1
]}

机构：

[1] Bardin Cent Res Inst Ferrous Met, Moscow, Russia

[2] Natl Univ Sci & Technol, MISiS, Moscow, Russia

[3] RPA CNIITMASH, Moscow, Russia

[4] Severstal Management JSC, Cherepovets, Russia

来源：

METALLURGIST | 2022年 / 66卷 / 7-8期

关键词：

electroslag remelting; electroslag surfacing; corrosion-resistant steel; bimetal; titanium loss; slag deoxidation; cladding layer;

D O I：

10.1007/s11015-022-01389-w

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Laboratory experiments were carried out to test the electroslag remelting of corrosion-resistant titaniumalloyed steel using AKF235 low-silicon flux. The titanium loss in these experiments was compared with the available literature data on titanium loss in similar steels during electroslag remelting using ANF-29 high-silicon flux. It is shown that the use of AKF235 flux reduces the titanium loss if all the other conditions (content of titanium dioxide in slag and slag deoxidation conditions) are equal. If the content of titanium dioxide in the starting flux is 2.5%, the titanium loss is practically suppressed by a sufficient amount of deoxidizers added to the slag: 6 g Al and 1.5 g Ti per 1 kg of melted metal. Reducing the weights of added deoxidants to 3 g Al and 0.5 g Ti per 1 kg of melted metal, as well as reducing the content of titanium dioxide in the slag increase the titanium loss.

引用

页码：782 / 791

页数：10