Annealing strengthening in a dilute Mg-Zn-Ca sheet alloy

被引：62
|
作者：
Zeng, Z. R. [1 ]
Zhu, Y. M. [1 ]
Bian, M. Z. [1 ]
Xu, S. W. [2 ]
Davies, C. H. J. [3 ]
Birbilis, N. [1 ]
Nie, J. F. [1 ]
机构：
[1] Monash Univ, Dept Mat Sci & Engn, Clayton, Vic 3800, Australia
[2] Baosteel Grp Corp, Res Inst, R&D Ctr, Shanghai, Peoples R China
[3] Monash Univ, Dept Mech & Aerosp Engn, Clayton, Vic 3800, Australia
来源：
SCRIPTA MATERIALIA | 2015年 / 107卷
基金：
澳大利亚研究理事会;
关键词：
Mg alloys; Annealing strengthening; GP zone; Dislocation pinning; STRETCH FORMABILITY; ROOM-TEMPERATURE; TEXTURE; MECHANISMS; TENSILE;
D O I：
10.1016/j.scriptamat.2015.06.002
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Magnesium sheet alloy of dilute composition, Mg-0.3Zn-0.1Ca (at.%), does not exhibit any hardening response during heating. However, an annealing treatment at 80-200 degrees C, after some plastic strain in tension, leads to a remarkable strengthening, rather than softening, effect. By using electron backscattered diffraction and scanning transmission electron microscopy, it is found that the strengthening effect is caused by the pinning of gliding basal dislocations by GP zones and possibly solute atoms segregated to the dislocations. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：127 / 130
页数：4
相关论文
共 50 条
  • [1] Simulation-aided analysis on mechanical properties of dilute Mg-Zn-Ca alloy sheets
    Matsuoka, Yusuke
    Bian, Mingzhe
    Huang, Xinsheng
    Tsukada, Yuhki
    Koyama, Toshiyuki
    Chino, Yasumasa
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 906
  • [2] Dominant Deformation Mechanisms in Mg-Zn-Ca Alloy
    Ying, Tao
    Yu, Mingdi
    Chen, Yiwen
    Zhang, Huan
    Wang, Jingya
    Zeng, Xiaoqin
    [J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2022, 35 (12) : 1973 - 1982
  • [3] Texture Evolution in Mg-Zn-Ca Alloy Sheets
    D.-W. Kim
    B.-C. Suh
    M.-S. Shim
    J. H. Bae
    D. H. Kim
    Nack J. Kim
    [J]. Metallurgical and Materials Transactions A, 2013, 44 : 2950 - 2961
  • [4] Texture Evolution in Mg-Zn-Ca Alloy Sheets
    Kim, D. -W.
    Suh, B. -C.
    Shim, M. -S.
    Bae, J. H.
    Kim, D. H.
    Kim, Nack J.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (07): : 2950 - 2961
  • [5] Study of Sintering on Mg-Zn-Ca Alloy System
    Annur, Dhyah
    Lestari, Franciska P.
    Erryani, Aprilia
    Kartika, Ika
    [J]. METALLURGY AND ADVANCED MATERIAL TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT, 2018, 1964
  • [6] Coupling Thermomechanical Processing and Alloy Design to Improve Textures in Mg-Zn-Ca Sheet Alloys
    Berman, Tracy D.
    Allison, John E.
    [J]. JOM, 2021, 73 (05) : 1450 - 1459
  • [7] Coupling Thermomechanical Processing and Alloy Design to Improve Textures in Mg-Zn-Ca Sheet Alloys
    Tracy D. Berman
    John E. Allison
    [J]. JOM, 2021, 73 : 1450 - 1459
  • [8] Preparation and characterization of a new biomedical Mg-Zn-Ca alloy
    Sun, Yu
    Zhang, Baoping
    Wang, Yin
    Geng, Lin
    Jiao, Xiaohui
    [J]. MATERIALS & DESIGN, 2012, 34 : 58 - 64
  • [9] Microstructure and Mechanical Properties of Extruded Mg-Zn-Ca Alloy
    Zheng, M. Y.
    Tong, L. B.
    Xu, S. W.
    Hu, X. S.
    Wu, K.
    Kamado, S.
    [J]. PRICM 7, PTS 1-3, 2010, 654-656 : 703 - +
  • [10] Threshold creep behaviour of an aged Mg-Zn-Ca alloy
    Naghdi, F.
    Mahmudi, R.
    Kang, J. Y.
    Kim, H. S.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 696 : 536 - 543
12345