Investigations on the Microstructure and the Fracture Surface of Pulsed Nd: YAG Laser Welding of AISI 304 Stainless Steel

被引：1
|
作者：
Mousavi, S. A. A. Akbari [1 ]
Garehdaghi, A. [1 ]
机构：
[1] Univ Tehran, Univ Coll Engn, Sch Met & Mat Engn, Tehran, Iran
来源：
MATERIALS AND MANUFACTURING TECHNOLOGIES XIV | 2012年 / 445卷
关键词：
Laser welding; Metallography; Microstructure;
D O I：
10.4028/www.scientific.net/AMR.445.418
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents pulsed Nd:YAG laser welding of the 304 stainless steels. The welding tests were carried out with various operational parameters. The effects of laser welding variables on the geometry, microstructure and solidification of the weld are considered. The austenitic or ferritic solidification is produced in the 304 austenitic stainless steel depended upon the cooling rate and its chemical compositions. The possiblity of austenitic solidification compared with the terrific solidification decreases with the chromium to nickel equivalent ratio and that increases with cooling rates. Moreover, more ferrite is obtained if the cooling rate is increased or the higher power laser is used. The surface of fracture samples was considered and the reason for failure was investigated. The study shows that the fracture is in ductile type.
引用
收藏
页码：418 / 423
页数：6
相关论文
共 50 条
  • [1] Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steels
    Berretta, Jose Roberto
    de Rossi, Wagner
    Martins das Neves, Mauricio David
    de Almeida, Ivan Alves
    Vielra Junior, Nilson Dias
    [J]. OPTICS AND LASERS IN ENGINEERING, 2007, 45 (09) : 960 - 966
  • [2] Analysis of pulsed Nd:YAG laser welding of AISI 304 steel
    Kwanwoo Kim
    Jungkil Lee
    Haeyong Cho
    [J]. Journal of Mechanical Science and Technology, 2010, 24 : 2253 - 2259
  • [3] Analysis of pulsed Nd YAG laser welding of AISI 304 steel
    Kim, Kwanwoo
    Lee, Jungkil
    Cho, Haeyong
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (11) : 2253 - 2259
  • [4] Investigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304 Stainless Steel to AISI 1008 Steel
    Shamsudin, Shazarel
    Yoon, Phoon Chee
    [J]. MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 2012, 117-119 : 402 - 408
  • [5] Microstructure and corrosion behavior of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting
    Cui, C. Y.
    Cui, X. G.
    Zhang, Y. K.
    Zhao, Q.
    Lu, J. Z.
    Hu, J. D.
    Wang, Y. M.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2011, 206 (06): : 1146 - 1154
  • [6] Microstructure evolution and wear behavior of AISI 304 stainless steel after Nd:YAG pulsed laser surface melting
    Cui, C. Y.
    Shu, Y. X.
    Cui, X. G.
    Hu, J. D.
    [J]. APPLIED OPTICS, 2020, 59 (34) : 10862 - 10869
  • [7] Comparative study of pulsed Nd:YAG laser welding of AISI 304 and AISI 316 stainless steels
    Kumar, Nikhil
    Mukherjee, Manidipto
    Bandyopadhyay, Asish
    [J]. OPTICS AND LASER TECHNOLOGY, 2017, 88 : 24 - 39
  • [8] Effect of pulsed Nd: YAG laser powers on 304 stainless steel welding
    Candan, L.
    Demir, A.
    Akman, E.
    [J]. SIX INTERNATIONAL CONFERENCE OF THE BALKAN PHYSICAL UNION, 2007, 899 : 311 - +
  • [9] Surface oxidation phenomenon and mechanism of AISI 304 stainless steel induced by Nd:YAG pulsed laser
    Cui, C. Y.
    Cui, X. G.
    Ren, X. D.
    Qi, M. J.
    Hu, J. D.
    Wang, Y. M.
    [J]. APPLIED SURFACE SCIENCE, 2014, 305 : 817 - 824
  • [10] Metallurgical investigations of laser welding of AISI 304 stainless steel
    Mousavi, S. A. A. Akbari
    Gharedaghi, A.
    Mastoori, M.
    [J]. ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 41 - 44
12345