Pulse Pressuring Diffusion Bonding of Ti Alloy/Austenite Stainless Steel Processed by Surface Self-nanocrystallization

被引：16
|
作者：
Han, J. [1 ]
Sheng, G. M. [1 ]
Zhou, X. L. [1 ]
Sun, J. X. [1 ]
机构：
[1] Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400030, Peoples R China
来源：
ISIJ INTERNATIONAL | 2009年 / 49卷 / 01期
基金：
美国国家科学基金会;
关键词：
titanium alloy; stainless steel; pulse pressuring diffusion bonding (PPDB); intermetallic compound; MECHANICAL ATTRITION TREATMENT; TITANIUM; 304-STAINLESS-STEEL; TEMPERATURE; COPPER; IRON;
D O I：
10.2355/isijinternational.49.86
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Nanostructured surface layers were synthesized on the end face of Ti-4Al-2V titanium alloy and 0Cr18Ni9Ti austenite stainless steel rods by means of high energy shot peening (HESP). Making treated end surfaces as bonding interfaces, Ti-4Al-2V and 0Cr18Ni9Ti rods were bonded by pulse pressuring diffusion bonding (PPDB) on Gleeble-1500D tester at 650-750 degrees C. Joints were tested on tensile testing machine, the fractures and microstructures of joints were researched. Results showed that the maximum tension strength of 262.0 MPa was achieved, cleavage fracture took place while tension test of joints, and the grains in the vicinity of the diffusion layer are fined. But, brittle intermetallic compounds were absence on the bonding interface.
引用
收藏
页码：86 / 91
页数：6
相关论文
共 50 条
  • [1] Diffusion bonding of titanium alloy and stainless steel with surface nanocrystallization
    Han, Jing
    Sheng, Guangmin
    Zhou, Xiaoling
    Sun, Jianchun
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2010, 39 (01): : 42 - 45
  • [2] Diffusion Bonding of Titanium Alloy and Stainless Steel with Surface Nanocrystallization
    Han Jing
    Sheng Guangmin
    Zhou Xiaoling
    Sun Jianchun
    RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (01) : 42 - 45
  • [3] Pulse Pressuring Diffusion Bonding of Ti-4Al-2V/0Cr18Ni9Ti with Nanostructured Layer Synthesized by Surface Self-nanocrystallization
    Han, J.
    Sheng, G. M.
    Zhou, X. L.
    Sun, J. X.
    ISIJ INTERNATIONAL, 2009, 49 (08) : 1200 - 1205
  • [4] Effect of Surface Self-Nanocrystallization on Diffusion Bonding Between a Titanium Alloy and a TiAl-Based Alloy
    Fu, Xuesong
    Wang, Xiaochen
    Wang, Qi
    Zhou, Wenlong
    Xu, Huiyuan
    Liu, Degui
    Li, Zhiqiang
    Chen, Guoqing
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (10) : 5551 - 5560
  • [5] Effect of Surface Self-Nanocrystallization on Diffusion Bonding Between a Titanium Alloy and a TiAl-Based Alloy
    Xuesong Fu
    Xiaochen Wang
    Qi Wang
    Wenlong Zhou
    Huiyuan Xu
    Degui Liu
    Zhiqiang Li
    Guoqing Chen
    Journal of Materials Engineering and Performance, 2018, 27 : 5551 - 5560
  • [6] Impulse pressuring diffusion bonding of titanium alloy to stainless steel
    Yuan, X. J.
    Sheng, G. M.
    Qin, B.
    Huang, W. Z.
    Zhou, B.
    MATERIALS CHARACTERIZATION, 2008, 59 (07) : 930 - 936
  • [7] Impact pressure diffusion bonding on surface nanocrystallization titanium alloy/stainless steel
    School of Materials Science and Engineering, Chongqing University, Chongqing 400030, China
    Hanjie Xuebao, 2008, 10 (37-40):
  • [8] Diffusion coefficient during diffusion bonding of surface self-nanocrystallization 0Cr18Ni9Ti and TA17
    College of Materials Science and Engineering, Chongqing University, Chongqing 400030, China
    不详
    Hanjie Xuebao, 2008, 5 (25-29):
  • [9] Surface self-nanocrystallization of α+β titanium alloy by surface mechanical grinding treatment
    Chuang Li
    Wenfang Cui
    Yusheng Zhang
    Metals and Materials International, 2017, 23 : 512 - 518
  • [10] Impulse pressuring diffusion bonding of a copper alloy to a stainless steel with/without a pure nickel interlayer
    Yuan, Xinjian
    Tang, Kunlun
    Deng, Yongqiang
    Luo, Jun
    Sheng, Guangmin
    MATERIALS & DESIGN, 2013, 52 : 359 - 366
12345