Comparison of the Removal of an Anionic Dye from Aqueous Solutions by Adsorption with Organically Modified Clays and their Composites

In this study, organoclay and clay-biopolymer composites were evaluated for the adsorption process of an anionic red dye, Allura Red (AR), in aqueous solution. For this purpose, the cationic exchange capacity (CEC) of a natural bentonite was calculated, and it was modified with the cationic surfactant hexadecyltrimethylammonium bromide (OB). Furthermore, a commercial montmorillonite modified with dimethyldialkyl ammonium (OM) was also employed. These organo-modified clays were used for the synthesis of two series of composites, with alginate as the polymer matrix, and were identified as OBC and OMC, respectively; composites were obtained in the wet (W) and dry (D) states. The adsorbent materials were characterized by means of infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and dispersive energy spectroscopy (EDS). Afterwards, kinetics and isotherms studies were performed in batch systems, with dye solutions of different concentrations, without pH adjustment. Some parameters were evaluated, such as the variation of the pH value of the solution and the concentration of the dye with the organoclays and composites. Chemisorption was considered as the main mechanism that follows the adsorption processes of AR. Results demonstrated that the pseudo-second order was the kinetics model that best described the adsorption process of the AR dye, with both, hydrated and dry composites. Finally, the Freundlich and the Langmuir-Freundlich isotherms were the best models that described the hydrated and dry composites behavior, respectively.