Modified vertical bearing capacity for circular foundations in sand using reduced friction angle

被引：33

作者：

Ibsen, L. B. ^{[1
]}

Barari, A. ^{[1
]}

Larsen, K. A. ^{[2
]}

机构：

[1] Aalborg Univ, Dept Civil Engn, DK-9000 Aalborg, Denmark

[2] COWI AS, Aalborg, Denmark

来源：

OCEAN ENGINEERING | 2012年 / 47卷

关键词：

Circular surface footing; Vertical bearing capacity; Reduced friction angle; Bucket foundation;

D O I：

10.1016/j.oceaneng.2012.03.003

中图分类号：

U6 [水路运输]; P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

Bucket foundations, which are large cylindrical structures that are open at the base and closed at the top, recently have attracted much attention in offshore projects. To demonstrate the relationship between the vertical bearing capacity of a bucket foundation relative to the corresponding capacity of the circular plate, several loading tests on small-scale bucket and surface foundations were performed at Aalborg University. In the current research, the modified vertical bearing capacity of circular surface footings was investigated with the reduced friction angle. A linear relationship with reasonable accuracy was found between the relative density and the reduced friction angle. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：1 / 6

页数：6

共 50 条

[1] Vertical bearing capacity of circular surface foundations considering the effect of compactness and stress level on the sand friction angle
Liu, Jinzhong
Chen, Xuguang
OCEAN ENGINEERING, 2023, 280
[2] Vertical bearing capacity of bucket foundations in sand
Park, Jeong-Seon
Park, Duhee
Yoo, Jin-Kwon
OCEAN ENGINEERING, 2016, 121 : 453 - 461
[3] A comparison of the bearing capacity of flat and conical circular foundations on sand
White, D. J.
Teh, K. L.
Leung, C. F.
Chow, Y. K.
GEOTECHNIQUE, 2008, 58 (10): : 781 - 792
[4] Vertical bearing capacity of skirted circular foundations on Tresca soil
Martin, CM
PROCEEDINGS OF THE FIFTEENTH INTERNATIONAL CONFERENCE ON SOIL MECHANICS AND GEOTECHNICAL ENGINEERING VOLS 1-3, 2001, : 743 - 746
[5] A comparison of the bearing capacity of flat and conical circular foundations on sand DISCUSSION
Orr, T.
GEOTECHNIQUE, 2010, 60 (02): : 147 - 149
[6] Vertical capacity of grillage foundations in sand
Bransby, M. F.
Brown, M. J.
Knappett, J. A.
Hudacsek, P.
Morgan, N.
Cathie, D.
Maconochie, A.
Yun, G.
Ripley, A. G.
Brown, N.
Egborge, R.
CANADIAN GEOTECHNICAL JOURNAL, 2011, 48 (08) : 1246 - 1265
[7] Bearing capacity of foundations on sand using the method of slip line
Department of Civil Engineering, National Taipei University of Technology, No. 1, Sec. 3, ZhongXiao E. Rd., Taipei, 10608, Taiwan
不详
J. Mar. Sci. Technol., 2006, 1 (1-14):
[8] Bearing capacity of perforated surface foundations on sand
Wang, Rong
Yue, Yang
Feng, Xiaowei
Zhang, Chunhui
Chen, Hongzhen
Wang, Le
Tian, Yinghui
SHIPS AND OFFSHORE STRUCTURES, 2025, 20 (01) : 133 - 142
[9] Using shear modulus to predict the bearing capacity of strip foundations on sand
Murison, Ruan Andrew
Heymann, Gerhard
PROCEEDINGS OF THE 8TH INTERNATIONAL SYMPOSIUM ON DEFORMATION CHARACTERISTICS OF GEOMATERIALS, IS-PORTO 2023, 2024, 544
[10] Failure surface for shallow foundations in sand using a classical bearing capacity
Hirai, Hiroyoshi
SOILS AND FOUNDATIONS, 2022, 62 (02)

← 1 2 3 4 5 →