Application of Castor Oil-based Cutting Fluids in Precision Turning

被引：3
|
作者：
Pei, H. J. [1 ]
Shen, Y. J. [1 ]
Shen, C. G. [1 ]
Wang, G. C. [1 ]
机构：
[1] Jiangsu Univ, Inst Precis Engn, Zhenjiang, Peoples R China
来源：
MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5 | 2012年 / 130-134卷
关键词：
Vegetable oil; Cutting fluid; Emulsion; Biodegradable; Castor oil; QUANTITY LUBRICATION; VEGETABLE-OILS; COLD-AIR;
D O I：
10.4028/www.scientific.net/AMM.130-134.3830
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Green machining is a process that implements sustainable development strategy. In order to reduce cost and decrease environmental pollution in manufacturing process, a sort of biodegradable castor oil-based emulsion is developed, whose physical and chemical properties can correspond with the national standards. The cooling and lubricating properties of the emulsion are better while machining steel materials through comparative experiments with certain imported commodity synthetic cutting fluid. The emulsion can successfully substitute for commodity fluid because of its high performance-price ratio.
引用
收藏
页码：3830 / 3834
页数：5
相关论文
共 50 条
  • [1] Investigation of vegetable oil-based cutting fluids enhanced with nanoparticle additions in turning operations
    Manikanta, Javvadi Eswara
    Ambhore, Nitin
    Thellaputta, Gopala Rao
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2025, 27 (01):
  • [2] Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process
    S. A. Lawal
    I. A. Choudhury
    Y. Nukman
    The International Journal of Advanced Manufacturing Technology, 2013, 67 : 1765 - 1776
  • [3] Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process
    Lawal, S. A.
    Choudhury, I. A.
    Nukman, Y.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 67 (5-8): : 1765 - 1776
  • [4] Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process
    Department of Engineering Design and Manufacture, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
    Lawal, S.A. (lawalbert2003@yahoo.com), 1765, Springer London (67): : 5 - 8
  • [5] Effect of Coconut Oil-Based Cutting Fluid on Cutting Performance During Turning With Minimal Fluid Application
    Rengiah, Robinson Gnanadurai
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2022, 12 (01)
  • [6] Formulation, characterization, mechanism, and application of vegetable oil-based nano-cutting fluids
    Wang, Wei
    Lin, Hualin
    Zhou, Mingan
    Xie, Haijiang
    Dai, Bin
    Han, Sheng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 136 (3-4): : 909 - 923
  • [7] Castor Oil-Based Biodegradable Polyesters
    Kunduru, Konda Reddy
    Basu, Arijit
    Zada, Moran Haim
    Domb, Abraham J.
    BIOMACROMOLECULES, 2015, 16 (09) : 2572 - 2587
  • [8] Application of Organoclays in Oil-Based Drilling Fluids: A Review
    Mahmoud, Ali
    Gajbhiye, Rahul
    Elkatatny, Salaheldin
    ACS OMEGA, 2023, 8 (33): : 29847 - 29858
  • [9] Nonedible vegetable oil-based cutting fluids for machining processes - a review
    Katna, Rahul
    Suhaib, M.
    Agrawal, Narayan
    MATERIALS AND MANUFACTURING PROCESSES, 2020, 35 (01) : 1 - 32
  • [10] Comparative evaluations of surface roughness during hard turning under dry and with water-based and vegetable oil-based cutting fluids
    Chinchanikar, Satish
    Salve, A. V.
    Netake, P.
    More, A.
    Kendre, S.
    Kumar, R.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 1966 - 1975
12345