Influence of intake geometry variations on in-cylinder flow and flow-spray interactions in a stratified direct-injection spark-ignition engine captured by time-resolved particle image velocimetry

Time-resolved particle image velocimetry and Mie-scattering of fuel droplets at 16kHz were used to capture simultaneously the temporal evolution of the in-cylinder flow field and spray formation within a direct-injection spark-ignition engine. The engine was operated in stratified combustion mode, with stratified mixtures created by a triple injection late in the compression stroke. The impact of geometric variation of the intake port on in-cylinder flow and flow-spray interactions was investigated, focusing on the second injection, since it provides ignitable mixtures at the time of ignition and is subject to strong fluctuations, rather than the first injection, which is very reproducible. Flow field statistics conditioned on the spray shape of the second injection revealed regions with macroscopic cycle-to-cycle flow variations, which correlated with the spray for all recorded cycles. The flow-spray interaction was traced back to before the first injection using correlation analysis, which revealed that cycle-to-cycle fluctuations of the large-scale tumble vortex had a big impact on the spray shape of the second injection, while the first injection was unaffected. This indicates that the origin of the spray fluctuations may be during intake. Despite significant flow modifications due to the intake port geometry variation, fluctuation levels of the second injection were the same for both geometries, that is, spray fluctuations were not sensitive to the geometric change.