An experiment on the shape and depth of air pocket on air spindle vibrations in ultra precision machine tools

被引：5

作者：

Akhondzadeh, Mohammad ^{[1
]}

Vahdati, Mehrdad ^{[2
]}

机构：

[1] Islamic Azad Univ, Dept Engn, Ahvaz 6134937333, Iran

[2] KN Toosi Univ Technol, Dept Mech Engn, Tehran, Iran

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2013年 / 227卷 / B4期

关键词：

Ultra precision machining; air spindle; air pocket; vibrations; nanomachining; DESIGN;

D O I：

10.1177/0954405412471525

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In order to achieve nanometer accuracies, low vibration in air spindle is vital. Some parameters affecting air spindle vibration could be mentioned as rotational speed, inlet hole diameter, air pocket geometry, air gap pressure and so on. In this study, the air pocket geometry and depth plus rotational speed are experimentally investigated. Three levels of quantity are selected for each parameter. Vibration movements were considered as experiment output. Then, experimental results were analyzed by design of experiment method. The results showed that the air spindle with an air pocket of rectangular shape and 3 mm depth at low rotational speed has minimum vibrations.

引用

页码：616 / 620

页数：5

共 50 条

[1] Study of variable depth air pockets on air spindle vibrations in ultra-precision machine tools
Akhondzadeh, M.
Vahdati, M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 73 (5-8): : 681 - 686
[2] Study of variable depth air pockets on air spindle vibrations in ultra-precision machine tools
M. Akhondzadeh
M. Vahdati
The International Journal of Advanced Manufacturing Technology, 2014, 73 : 681 - 686
[3] Air pocket effects on air spindle vibrations in nanomachining
Akhondzadeh, Mohammad
Vahdati, Mehrdad
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (03) : 328 - 336
[4] Air Characteristics in Air Turbine Spindle of Ultra Precision Machines
Vahdati, M.
Azimi, E.
Shokuhfar, A.
DIFFUSION IN SOLIDS AND LIQUIDS V, PTS 1 AND 2, 2010, 297-301 : 396 - 401
[5] Control approaches for high-precision machine tools with air bearings
Schmidt, C
Heinzl, J
Brandenburg, G
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 1999, 46 (05) : 979 - 989
[6] Assessing spindle rotation errors of precision machine tools
Figatner, A.M., 1600, (10):
[7] Tribology in Ultra-Precision Machine Tools
Yoshioka, Hayato
Shinno, Hidenori
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2010, 55 (11) : 797 - 802
[8] Tribology in ultra-precision machine tools
Yoshioka, Hayato
Shinno, Hidenori
Toraibarojisuto/Journal of Japanese Society of Tribologists, 2010, 55 (11): : 797 - 802
[9] Dynamic characteristics of spindle with water-lubricated hydrostatic bearings for ultra-precision machine tools
Fedorynenko, Dmytro
Kirigaya, Rei
Nakao, Yohichi
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2020, 63 : 187 - 196
[10] Modal analysis of an aerostatic spindle system for ultra-precision machine tools at different spin speeds
Chen, Peng
Zhuang, Hui
Chang, Yu
Ding, Jianguo
Zhong, Qidi
Yang, Hong
ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (09):

← 1 2 3 4 5 →