The Supralimus® sirolimus-eluting stent

The use of biodegradable polymeric coatings has emerged as a potential bioengineering target to improve the vascular compatibility of coronary drug-eluting stents (DESs). This review summarizes the main features and scientific facts about the Supralimus (R) sirolimus-eluting stent (Sahajanand Medical Technologies Ltd, Surat, India), which is a biodegradable polymer-based, sirolimus-eluting metallic stent that was recently introduced for routine use in Europe. The novel stent is built on a stainless steel platform, coated with a blend of biodegradable polymers (poly-l-lactide, poly-dl-lactide-co-glycolide and polyvinyl pyrrolidone; coating thickness is 4-5 mu m). The active agent is the antiproliferative sirolimus in a dose load of 1.4 mu g/mm(2), which is released within 48 days. The Supralimus stent was initially evaluated in the single-arm SERIES-I study, which showed binary angiographic restenosis rates of 0% (in-stent) and 1.7% (in-segment) and an instent late lumen loss of 0.09 +/- 0.28 mm. The multicenter randomized PAINT trial compared two DESs with identical metallic platforms and biodegradable polymer carriers, but different agents (Infinnium (R) [Sahajanand Medical Technologies Pvt Ltd] paclitaxel-eluting stent or Supralimus sirolimus-eluting stent) against bare stents. After 3 years, the pooled DES population had similar rates of cardiac death or myocardial infarction (9 vs 7.1%; p = 0.6), but a lower risk of repeat interventions (10 vs 29.9%; p < 0.01) than controls with bare stents. The incidence of definite or probable stent thrombosis in the pooled DES group was 2.3% (1st year: 1.8%; 2nd year: 0.4% and 3rd year: 0%). These results demonstrate that the novel Supralimus stents are effective in reducing reintervention, while potentially improving the safety profile by decreasing the risk of late-term thrombosis, even though further studies would be necessary to confirm these findings.