Computational study of decaying annular vortex flow using the Rε/k-ε turbulence model

被引:18
|
作者
Saqr, Khalid M. [1 ,3 ]
Kassem, Hassan I. [1 ]
Aly, Hossam S. [2 ]
Wahid, Mazlan A. [1 ]
机构
[1] Univ Teknol Malaysia, Fac Mech Engn, High Speed Reacting Flow Lab, Skudai 81310, Johor Bahru, Malaysia
[2] Univ Leicester, Dept Phys & Astron, Leicester LE1 7RH, Leics, England
[3] King Abdulaziz Univ, Fac Engn, Dept Aeronaut Engn, Jeddah 21589, Saudi Arabia
关键词
Vortex flow; Decaying vortex; OpenFOAM (R); Turbulence modeling; CFD; SWIRLING FLOW; HEAT-TRANSFER; PIPE; SEPARATOR; COMBUSTOR; EXCHANGER; INLET; LES;
D O I
10.1016/j.apm.2011.11.082
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this article, we present three dimensional CFD study of turbulent vortex flow in an annular passage using OpenFOAM 1.6. The vortex flow is generated by introducing the flow through a tangential entry to the passage. For the analysis presented in this article, turbulence was modeled using the R epsilon/k - epsilon model, in addition, a comparison between such model with the standard k - epsilon model was conducted and discussed. The main characteristics of the flow such as vortex structure and recirculation zone were investigated. It was found that flow is subjected to Rankine vortex structure with three forced vortex regimes and a free vortex region near to the outer wall. The phenomenon of vortex decay was investigated by depicting the swirl number trend along the axial direction of the flow domain. It was found that the vortex decay is subjected to an exponential decay behavior. New coefficients for the exponential decay correlation were derived based on local values of velocity components in different radial planes. (C) 2011 Elsevier Inc. All rights reserved.
引用
收藏
页码:4652 / 4664
页数:13
相关论文
共 50 条
  • [1] K-ε model for rotating homogeneous decaying turbulence
    Marzougui, Hamed
    [J]. CANADIAN JOURNAL OF PHYSICS, 2016, 94 (11) : 1200 - 1204
  • [2] Computations of shear driven vortex flow in a cylindrical cavity using a modified k-ε turbulence model
    Saqr, Khalid M.
    Aly, Hossam S.
    Kassem, Hassan I.
    Sies, Mohsin M.
    Wahid, Mazlan A.
    [J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (08) : 1072 - 1077
  • [3] Numerical Study of Flow in Skewed Compound Channel Using k-ε Turbulence Model
    Rezaei, B.
    Seif, M. M.
    [J]. IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2022, 46 (05) : 3919 - 3929
  • [4] Numerical Study of Flow in Skewed Compound Channel Using k-ε Turbulence Model
    B. Rezaei
    M. M. Seif
    [J]. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2022, 46 : 3919 - 3929
  • [5] Computational modeling of the neutrally stratified atmospheric boundary layer flow using the standard k-ε turbulence model
    Juretic, Franjo
    Kozmar, Hrvoje
    [J]. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 2013, 115 : 112 - 120
  • [6] K-ε model computations of the flow in rotating annular flumes
    Booij, R
    [J]. ENVIRONMENTAL AND COASTAL HYDRAULICS: PROTECTING THE AQUATIC HABITAT, PROCEEDINGS OF THEME B, VOLS 1 & 2, 1997, 27 : 1274 - 1279
  • [7] STUDY ON TIP LEAKAGE VORTEX IN AN AXIAL FLOW PUMP BASED ON MODIFIED SHEAR STRESS TRANSPORT k-ω) TURBULENCE MODEL
    Zhang, Desheng
    Pan, Dazhi
    Shi, Weidong
    Wu, Suqing
    Shao, Peipei
    [J]. THERMAL SCIENCE, 2013, 17 (05): : 1551 - 1555
  • [8] Uncertainty Quantification of k-ω Turbulence Model for Hypersonic Flow
    Zhao, Yatian
    Liu, Hongkang
    Yan, Chao
    [J]. PROCEEDINGS OF 2018 9TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE 2018), 2018, : 526 - 530
  • [9] Computational fluid dynamic's simulation of a trawl door, using the k-ε turbulence model
    Brynjolfsson, S
    [J]. COMPUTATIONAL FLUID DYNAMICS '98, VOL 1, PARTS 1 AND 2, 1998, : 1129 - 1133
  • [10] Computational Fluid Dynamics Analysis of Compressible Flow Through a Converging-Diverging Nozzle using the k-ε Turbulence Model
    Khalid, Muhammad Waqas
    Ahsan, Muhammad
    [J]. ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2020, 10 (01) : 5180 - 5185