The microstructures and mechanical properties of friction stir welded AZ31 with CaO Mg alloys

被引：11
|
作者：
Choi, Don-Hyun [1 ]
Kim, Shae-Kwang [2 ]
Jung, Seung-Boo [1 ]
机构：
[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, Gyeonggi Do 440746, South Korea
[2] Korea Inst Ind Technol, Inchon 406840, South Korea
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2013年 / 554卷
关键词：
Friction stir welding; AZ31; CaO; Hardness; Thermal stability; MAGNESIUM; TEMPERATURE;
D O I：
10.1016/j.jallcom.2012.11.143
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The present study was carried out to evaluate the microstructural and mechanical properties of a friction stir welded AZ31 with CaO Mg alloys. Friction stir welding (FSW) was performed at a tool rotation speed of 1600 rpm and a traveling speed of 80 mm/min. An intermetallic compound, Al2Ca, was resulted in the base metal (BM). In the stir zone (SZ), fine grains and intermetallic compound particles formed due to dynamic recrystallization and mechanical stirring. Hardness profiling showed that the SZ was harder than the BM, likely due to the presence of fine grains and thermally stable intermetallic compounds. Published by Elsevier B.V.
引用
收藏
页码：162 / 168
页数：7
相关论文
共 50 条
  • [1] The microstructures and mechanical properties of friction stir welded AZ31 with CaO Mg alloys
    Jung, S.-B. (sbjung@skku.edu), 1600, Elsevier Ltd (554):
  • [2] Microstructure and mechanical properties of friction stir welded AZ31 Mg alloy
    Lee, WB
    Yeon, YM
    Kim, SK
    Kim, YJ
    Jung, SB
    MAGNESIUM TECHNOLOGY 2002, 2002, : 309 - 312
  • [3] Microstructures and mechanical properties of thick AZ31 magnesium alloy welded joint by friction stir welding
    Yang, Suyuan
    Zhang, Baolei
    Hanjie Xuebao/Transactions of the China Welding Institution, 2009, 30 (05): : 1 - 4
  • [4] Effect of cold spray processes on friction stir welded microstructures of AZ31 magnesium alloys
    Zhang, Hengyu
    Wang, Shanlin
    Xing, Li
    Yang, Chenggang
    MATERIALS, MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 842 : 311 - 315
  • [5] Simulation of microtexture developments in the stir zone of friction stir-welded AZ31 Mg alloys
    Kim, M. S.
    Jung, J. Y.
    Song, Y. M.
    Choi, S. -H.
    INTERNATIONAL JOURNAL OF PLASTICITY, 2017, 94 : 24 - 43
  • [6] Enhancing mechanical properties of friction stir welded AZ31 alloys by post-weld compression
    Liu, Zhe
    Wu, Fan
    Feng, Bo
    Liu, Li
    Dong, Chunlin
    Zhao, Yunqiang
    Song, Bo
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2023, 28 (06) : 468 - 477
  • [7] Simulation of Friction Stir Welding of AZ31 Mg Alloys
    College of Materials Science and Engineering, Chongqing University, Chongqing
    400044, China
    不详
    510650, China
    不详
    400044, China
    Mater., 2024, 20
  • [8] Microstructural analysis of friction stir welded Mg AZ31 alloy
    Gulati, Piyush
    Shukla, Dinesh Kumar
    Gupta, Akash
    Singh, Manpreet
    Kumar, Rajeev
    Singh, Jaiinder Preet
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 1145 - 1150
  • [9] The microstructures evolution mechanism of friction stir welded AZ31 magnesium alloy
    Zhang, H
    Lin, SB
    Wu, L
    Feng, JC
    RARE METAL MATERIALS AND ENGINEERING, 2005, 34 (07) : 1021 - 1024
  • [10] Influence of Zn interlayer addition on microstructure and mechanical properties of friction stir welded AZ31 Mg alloy
    Xu, R. Z.
    Ni, D. R.
    Yang, Q.
    Liu, C. Z.
    Ma, Z. Y.
    JOURNAL OF MATERIALS SCIENCE, 2015, 50 (12) : 4160 - 4173
12345