Analysis of Fast Transient Voltage Distributions in Transformer Windings under Different Insulation Conditions

Evolution and operation of modern grids and networks necessitate reconsideration of several characteristics. For example transformers operating in power grid or in industrial environment are subjected nowadays also to transients or stimulus with different waveforms. Traditionally, in case of power transformers the stresses are related to lightning and switching phenomena. In industrial networks distribution transformers are exposed to many switching operations generating often overvoltages. Transformer windings subjected to such system disturbances are stressed due to the non-linear transient voltage distribution along the winding and potential resonance phenomena. Initial voltage distribution, reflects mainly the capacitive coupling between turns, windings, core and tank. The non-uniform distribution of voltage results in concentred stress in certain parts of the winding. Winding resonance might occur, if the frequency spectrum of incoming surge matches the winding natural frequencies. Therefore external transients occurring in power systems might trigger internal overvoltages with large maximum value in transformer windings. The frequency characteristic of the transformer winding may determine those regions in the frequency spectrum. The paper presents results of voltage distribution measurements performed on model windings with different constructions subjected to voltages with different rise time. The experimental setup allows for investigation of influence of the dielectric (air/oil) and temperature on the stress distribution along the winding. Also the impact of oil and temperature on frequency characteristics of internal voltages are shown. The presented results might be used both for design and optimization of transformers windings.