Fracture toughness analysis of laser-beam-welded superalloys Inconel 718 and 625

被引：0
|
作者：
Yeni, C. [1 ]
Kocak, M. [1 ]
机构：
[1] Dokuz Eylul Univ, Fac Engn, TR-35100 Izmir, Turkey
来源：
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2006年 / 29卷 / 07期
关键词：
CTOD; fracture toughness; laser-beam welding; R-curve; superalloy;
D O I：
10.1111/j.1460-2695.2006.01025.x
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this study, two 3.2-mm thick Ni-base superalloys, Inconel 718 and 625, have been laser-beam-welded by a 6-kW CO2 laser and their room temperature fracture toughness properties have been investigated. Fracture toughness behaviour of the base metal (BM), fusion zone (FZ) and heat affected zone (HAZ) regions was determined in terms of crack tip opening displacement (CTOD) using compact tension-type (C(T)) specimens. Laser-beam-weld regions showed no significant strength overmatching in both alloys. Ductile crack growth analysis (R-curve) also showed that both materials exhibited similar behaviour. Compared to the BM there is a slight decrease in fracture toughness of the fusion and the HAZ.
引用
收藏
页码：546 / 557
页数：12
相关论文
共 50 条
  • [1] Fracture analysis of laser beam welded superalloys Inconel 718 and 625 using the FITNET procedure
    Yeni, C.
    Kocak, M.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2008, 85 (08) : 532 - 539
  • [2] Properties of laser beam welded superalloys inconel 625 and 718
    Çam, G
    dos Santos, JF
    Koçak, M
    Fischer, A
    Ratjen, R
    ECLAT - EUROPEAN CONFERENCE ON LASER TREATMENT OF MATERIALS, 1998, : 333 - 338
  • [3] Microstructural analysis of laser-beam-welded directionally solidified INCONEL 738
    Sidhu, R. K.
    Ojo, O. A.
    Chaturvedi, M. C.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2007, 38A (04): : 858 - 870
  • [4] Microstructural Analysis of Laser-Beam-Welded Directionally Solidified INCONEL 738
    R.K. SIDHU
    O.A. OJO
    M.C. CHATURVEDI
    Metallurgical and Materials Transactions A, 2007, 38 : 858 - 870
  • [5] Testing of the notch-impact toughness of laser-beam-welded joints
    Dilthey, Ulrich
    Lüder, Frederic
    Bleck, Wolfgang
    Langenberg, Peter
    Nagel, Mariluise
    Schweissen und Schneiden/Welding and Cutting, 2000, 52 (10):
  • [6] Testing of the notch-impact toughness of laser-beam-welded joints
    Dilthey, U.
    Lüder, F.
    Bleck, W.
    Langenberg, P.
    Nagel, M.
    Welding Research Abroad, 2001, 47 (04): : 35 - 38
  • [7] Microstructure and mechanical properties of laser beam welded Inconel 718
    Hirose, A
    Sakata, K
    Kobayashi, KF
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 1998, 13 (1-2): : 28 - 44
  • [8] STUDIES ON THE CORROSION RESISTANCE OF LASER-WELDED INCONEL 600 AND INCONEL 625 NICKEL-BASED SUPERALLOYS
    Lyczkowska, K.
    Michalska, J.
    ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (02) : 653 - 656
  • [9] Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures
    Ganesh, P.
    Kaul, R.
    Paul, C. P.
    Tiwari, Pragya
    Rai, S. K.
    Prasad, R. C.
    Kukreja, L. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (29-30): : 7490 - 7497
  • [10] Anisotropy of the fracture toughness in aged inconel 718
    Liu, G
    Rehbein, DK
    Buck, O
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 16A AND 16B, 1997, 16 : 1451 - 1457
12345