Thermal Decomposition of CS by TG/DSC-FITR and PY-GC/MS

被引：0
|
作者：
Xue Tian [1 ,2 ]
Zhao Qi-zhi [2 ]
Han Yong-he [2 ]
Lyu Ning [1 ]
机构：
[1] Beijing Inst Technol, State Key Lab Explos Sci & Technol, Beijing 100081, Peoples R China
[2] 61699 Unit PLA2, Zhijiang, Peoples R China
来源：
PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MECHATRONICS, ELECTRONIC, INDUSTRIAL AND CONTROL ENGINEERING | 2015年 / 8卷
关键词：
2-Chlorobenzalmalononitrile; thermal analysis; FITR; PY; gas chromatography (GC); mass spectrometry (MS); thermal decomposition; RIOT CONTROL AGENT; DISPERSION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
As an excellent tear agent of the second generation, CS has been widely used in the police department of many countries. CS disperses the crowd depending on the aerosol in the air due to combustion and explosion. And at the same time, CS decomposes into a variety of products. With the use of TG/DSC-FITR and PY-GC/MS technologies, the CS decomposition performance has been studied. It has been found that CS begins to melt at 60 degrees C, boiling near 310 degrees C and decompose between 450 degrees C to 550 degrees C. There is a close relationship between thermal decomposition products and the temperature. At 550 degrees C. and 650 degrees C, 4 and 10 kinds of decomposition products will be produced respectively.
引用
收藏
页码：912 / 916
页数：5
相关论文
共 50 条
  • [1] Thermal decomposition of three kinds of sludge by TG-MS and PY-GC/MS
    Zuo, Wu
    Jin, Baosheng
    Huang, Yaji
    Sun, Yu
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2015, 121 (03) : 1297 - 1307
  • [2] Thermal decomposition characteristics of poly(phenylene sulfide) by stepwise Py-GC/MS and TG/MS techniques
    Perng, LH
    POLYMER DEGRADATION AND STABILITY, 2000, 69 (03) : 323 - 332
  • [3] Thermal properties and decomposition products of modified cotton fibers by TGA, DSC, and Py-GC/MS
    Isola, Mattia
    Colucci, Giovanna
    Diana, Aleandro
    Sin, Agusti
    Tonani, Alberto
    Maurino, Valter
    POLYMER DEGRADATION AND STABILITY, 2024, 228
  • [4] Thermal decomposition characteristics of poly(propylene carbonate) using TG/IR and Py-GC/MS techniques
    Li, XH
    Meng, YZ
    Zhu, Q
    Tjong, SC
    POLYMER DEGRADATION AND STABILITY, 2003, 81 (01) : 157 - 165
  • [5] Thermal decomposition of two synthetic glycosides by TG, DSC and simultaneous Py-GC-MS analysis
    W.-C. Xie
    X.-H. Gu
    Z.-C. Tan
    J. Tang
    G.-Y. Wang
    C.-R. Luo
    L.-X. Sun
    Journal of Thermal Analysis and Calorimetry, 2007, 87 : 505 - 510
  • [6] Thermal decomposition of two synthetic glycosides by TG, DSC and simultaneous Py-GC-MS analysis
    Xie, W-C.
    Tan, Z-C.
    Gu, X-H.
    Tang, J.
    Wang, G-Y.
    Luo, C-R.
    Sun, L-X.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2007, 87 (02) : 505 - 510
  • [7] Study of Thermal Degradation of Starch-Based Binder by TG-DTG-DSC, Py-GC/MS and DRIFTS
    Kaczmarska, K.
    Zymankowska-Kumon, S.
    Grabowska, B.
    Bobrowski, A.
    Cukrowicz, S.
    ARCHIVES OF FOUNDRY ENGINEERING, 2019, 19 (04) : 21 - 26
  • [8] Thermal decomposition of three kinds of sludge by TG–MS and PY–GC/MS
    Wu Zuo
    Baosheng Jin
    Yaji Huang
    Yu Sun
    Journal of Thermal Analysis and Calorimetry, 2015, 121 : 1297 - 1307
  • [9] Study on the thermal degradation of high performance fibers by TG/FTIR and Py-GC/MS
    Cai, Guang Ming
    Yu, Wei Dong
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2011, 104 (02) : 757 - 763
  • [10] Study on the thermal degradation of high performance fibers by TG/FTIR and Py-GC/MS
    Guang Ming Cai
    Wei Dong Yu
    Journal of Thermal Analysis and Calorimetry, 2011, 104 : 757 - 763
12345