Design and analysis of the PZT-based piezoelectric transformer

被引：1
|
作者：
Kozielski, Lucian [1 ]
Lisihska-Czekaj, Agata [1 ]
Czekaj, Dionizy [1 ]
机构：
[1] Univ Silesia, Dept Mat Sci, PL-41200 Sosnowiec, Poland
来源：
ADVANCED MATERIALS FORUM III, PTS 1 AND 2 | 2006年 / 514-516卷
关键词：
piezoelectric transformer; PZT; impedance spectroscopy;
D O I：
10.4028/www.scientific.net/MSF.514-516.198
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Piezoelectric transformer (PT) is a combination of piezoelectric actuator and transducer, which serve as the primary side and the secondary side respectively. In the present study the disk shaped (of 20 mm in diameter and 0.6 mm, in thickness), unipoled radial mode piezoelectric transformer based on modified PZT-type solid solution was custom designed and fabricated. Different input and output area ratios of the PT were studied, namely: 21, 4, 1. The electrical properties like voltage step-up ratio, output power and temperature rise were measured for PT operating at the first resonance frequency. With the driving voltage of 20 V-RMS, the 3 W output power, 165 V-RMS output voltage and temperature rise of 20 degrees C was obtained for PT with the input/output area ratio of 1. The voltage step-up ratio of 12.5 was obtained for PT with input/output area ratio of 21.
引用
收藏
页码：198 / 201
页数：4
相关论文
共 50 条
  • [1] Design and Simulation of PZT-based MEMS Piezoelectric Sensors
    Baker, Doyle J.
    Gonder, Casey
    Williams, Frances
    Bahoura, Messaoud
    Myers, Oliver
    [J]. ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2014, 2014, 9057
  • [2] PZT-Based Piezoelectric MEMS Technology
    Smith, Gabriel L.
    Pulskamp, Jeffrey S.
    Sanchez, Luz M.
    Potrepka, Daniel M.
    Proie, Robert M.
    Ivanov, Tony G.
    Rudy, Ryan Q.
    Nothwang, William D.
    Bedair, Sarah S.
    Meyer, Christopher D.
    Polcawich, Ronald G.
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2012, 95 (06) : 1777 - 1792
  • [3] Optimal design of PZT-based piezoelectric energy harvesting module for availability
    Park, Sanghyun
    Hong, Seong Kwang
    Lee, Tae Hee
    Kang, Kwangu
    Cho, Su-gil
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (03) : 1211 - 1218
  • [4] Optimal design of PZT-based piezoelectric energy harvesting module for availability
    Sanghyun Park
    Seong Kwang Hong
    Tae Hee Lee
    Kwangu Kang
    Su-gil Cho
    [J]. Journal of Mechanical Science and Technology, 2019, 33 : 1211 - 1218
  • [5] PZT-BASED PIEZOELECTRIC CERAMICS WITH COMPLEX STRUCTURES
    CHEN, XM
    YANG, JS
    [J]. MATERIALS LETTERS, 1995, 25 (1-2) : 53 - 55
  • [6] A novel structure for PZT-based piezoelectric microphone
    Zhao, HJ
    Ren, TL
    Liu, JS
    Liu, LT
    Li, ZJ
    [J]. NANOTECH 2003, VOL 1, 2003, : 356 - 359
  • [7] Design Optimization of PZT-Based Piezoelectric Cantilever Beam by Using Computational Experiments
    Kim, Jihoon
    Park, Sanghyun
    Lim, Woochul
    Jang, Junyong
    Lee, Tae Hee
    Hong, Seong Kwang
    Song, Yewon
    Sung, Tae Hyun
    [J]. JOURNAL OF ELECTRONIC MATERIALS, 2016, 45 (08) : 3848 - 3858
  • [8] Design Optimization of PZT-Based Piezoelectric Cantilever Beam by Using Computational Experiments
    Jihoon Kim
    Sanghyun Park
    Woochul Lim
    Junyong Jang
    Tae Hee Lee
    Seong Kwang Hong
    Yewon Song
    Tae Hyun Sung
    [J]. Journal of Electronic Materials, 2016, 45 : 3848 - 3858
  • [9] Synthesis and piezoelectric properties of PZT-based glass–ceramics
    K. P. Rema
    V. Kumar
    [J]. Journal of Materials Science: Materials in Electronics, 2009, 20 : 380 - 385
  • [10] Electrical output performance of PZT-based piezoelectric ceramics
    Xu, CN
    Akiyama, M
    Nonaka, K
    Shobu, K
    Watanabe, T
    [J]. ISAF '96 - PROCEEDINGS OF THE TENTH IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS, VOLS 1 AND 2, 1996, : 967 - 970
12345