Study of Biodiesel Blends on Emission and Performance Characterization of a Variable Compression Ratio Engine

被引:20
|
作者
Chavan, Supriya B. [1 ]
Kumbhar, Rajendra Rayappa [2 ]
Kumar, Ashutosh [3 ]
Sharma, Yogesh C. [3 ]
机构
[1] Bhagwant Univ, Dept Chem, Ajmer 305004, Rajasthan, India
[2] Rajarshi Chhatrapati Sahu Coll, Kolhapur 416002, Maharashtra, India
[3] Indian Inst Technol BHU Varanasi, Dept Chem, Varanasi 221005, Uttar Pradesh, India
关键词
DIESEL-ENGINE; COMBUSTION CHARACTERISTICS; EXHAUST EMISSIONS; VEGETABLE-OILS; METHYL-ESTER; FUEL; ETHANOL; PALM;
D O I
10.1021/acs.energyfuels.5b00742
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This study explores the emission of different pollutants using different blends in a variable compression ratio (VCR) engine. Biodiesel synthesized from Jatropha oil using a heterogeneous catalyst was investigated for emission analysis on a single-cylinder VCR engine with various blending ratios as well as load. Blends (biodiesel + diesel) of JB00, JB10, JB20, JB30, and JB100 were prepared at 40 degrees C. The emission parameters, such as nitrogen oxides (NOx), carbon monoxide (CO), and hydrocarbon (HC), were studied and compared to diesel fuel. Results showed that, among the blends prepared from methyl ester of Jatropha, JB30 shows reduction in emissions of CO and HC up to 43 and 50%, respectively, with an increment of NOx emission up to 20% at the lowest load and compression ratio (CR) of 15. The optimum parameter for the lowest pollutant emission for JB30 was found with a load of 6 kg at CR of 15.
引用
收藏
页码:4393 / 4398
页数:6
相关论文
共 50 条
  • [1] INVESTIGATION OF THE PERFORMANCE AND EMISSION CHARACTERISTICS OF CEIBA PENTANDRA BIODIESEL BLENDS IN A VARIABLE COMPRESSION RATIO ENGINE
    Sekar, R. Raja
    Srinivasan, R.
    Muralidharan, K.
    TRANSACTIONS OF FAMENA, 2022, 46 (04) : 73 - 86
  • [2] PERFORMANCE OF VARIABLE COMPRESSION RATIO CI ENGINE USING BLENDS OF PALM BIODIESEL
    Shanmughasundaram, P.
    OXIDATION COMMUNICATIONS, 2015, 38 (4A): : 2199 - 2209
  • [3] Performance and emission characteristics of variable compression ratio CI engine fueled with dual biodiesel blends of Rapeseed and Mahua
    Saravanan, A.
    Murugan, M.
    Reddy, M. Sreenivasa
    Parida, Satyajeet
    FUEL, 2020, 263
  • [4] Performance, emission and combustion characteristics of biodiesel fuelled variable compression ratio engine
    Muralidharan, K.
    Vasudevan, D.
    Sheeba, K. N.
    ENERGY, 2011, 36 (08) : 5385 - 5393
  • [5] Performance and emission analysis of Karanja biodiesel using variable compression ratio engine
    Sastry, Susarla Venkata Ananta Rama
    INTERNATIONAL JOURNAL OF ENVIRONMENT AND WASTE MANAGEMENT, 2024, 34 (01) : 119 - 130
  • [6] Performance Comparison of Microalgae Biodiesel Blends with Petro–Diesel on Variable Compression Ratio Engine
    Soni A.K.
    Kumar S.
    Pandey M.
    Journal of The Institution of Engineers (India): Series E, 2022, 103 (1) : 53 - 63
  • [7] Performance characteristics of a supercharged variable compression ratio diesel engine fueled by biodiesel blends
    El-Adawy, Mohammed
    El-Kasaby, M.
    Eldrainy, Yehia A.
    ALEXANDRIA ENGINEERING JOURNAL, 2018, 57 (04) : 3473 - 3482
  • [8] EFFECT OF COMPRESSION RATIO WITH BIODIESEL AND ITS BLENDS ON PERFORMANCE AND EMISSION CHARACTERISTICS OF AN IC ENGINE
    Roji, S. Sheeju Selva
    Raj, R. Edwin
    Jose, D. F. Melvin
    Kennedy, Z. Robert
    JOURNAL OF ENVIRONMENTAL PROTECTION AND ECOLOGY, 2015, 16 (02): : 601 - 609
  • [9] Experimental Investigation on Performance and Exhaust Emission Characteristics of Variable Compression Ratio Diesel Engine Fueled with Microalgae Biodiesel Blends
    Kale, Bhojraj N.
    Patle, S. D.
    Khawale, V. R.
    Lutade, S., V
    Mungale, N. P.
    BIOSCIENCE BIOTECHNOLOGY RESEARCH COMMUNICATIONS, 2021, 14 (03): : 1167 - 1172
  • [10] Effect of Variable Compression Ratio on Performance of a Diesel Engine Fueled with Karanja Biodiesel and its Blends
    Mishra, Rahul Kumar
    Soota, Tarun
    Singh, Ranjeet
    INTERNATIONAL CONFERENCE ON MATERIALS, ALLOYS AND EXPERIMENTAL MECHANICS (ICMAEM-2017), 2017, 225