Energy consumption and process sustainability of hard milling with tool wear progression

被引：90

作者：

Liu, Z. Y. ^{[1
]}

Guo, Y. B. ^{[1
]}

Sealy, M. P. ^{[1
]}

Liu, Z. Q. ^{[2
]}

机构：

[1] Univ Alabama, Dept Mech Engn, Tuscaloosa, AL 35487 USA

[2] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2016年 / 229卷

关键词：

Energy; Emissions; Environmental impact; Machining; Sustainable manufacturing; POWER-CONSUMPTION; MODEL;

D O I：

10.1016/j.jmatprotec.2015.09.032

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Tool wear progression is inevitable in precision cutting. However, the effect of tool wear on energy consumption at machine, spindle, and process levels is yet to understand. In this study, specific energy in dry milling of AISI H13 was studied at the machine, spindle, and process levels. The effect of process parameters and tool wear progression on energy consumption at each level was investigated. The emissions and environmental impact induced by the machine tool's energy consumption and the cutting tool embodied energy were investigated. The results indicated that tool wear progression only has a predominant influence on energy consumption at the process level but not the machine and spindle levels. However, the cutting tool embodied energy had a significant effect on total specific energy, process emissions, and environmental impact in hard milling. The predictive models have been developed to quantify the relationships between material removal rate and specific energy, emissions, and environmental impact. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：305 / 312

页数：8

共 50 条

[1] A novel energy consumption model for milling process considering tool wear progression
Shi, K. N.
Zhang, D. H.
Liu, N.
Wang, S. B.
Ren, J. X.
Wang, S. L.
[J]. JOURNAL OF CLEANER PRODUCTION, 2018, 184 : 152 - 159
[2] STOCHASTIC MODELING AND ANALYSIS OF SPINDLE ENERGY CONSUMPTION DURING HARD MILLING WITH A FOCUS ON TOOL WEAR
Wang, Xingtao
Williams, Robert E.
Sealy, Michael P.
Rao, Prahalada
Guo, Yuebin
[J]. PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 3, 2018,
[3] Energy consumption considering tool wear and optimization of cutting parameters in micro milling process
Zhang, Xuewei
Yu, Tianbiao
Dai, Yuanxing
Qu, Sheng
Zhao, Ji
[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 178
[4] Energy Consumption Characteristics in Finish Hard Milling of Tool Steels
Liu, Z. Y.
Sealy, M. P.
Guo, Y. B.
Liu, Z. Q.
[J]. 43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43, 2015, 1 : 477 - 486
[5] INFLUENCE OF PARAMETERS OF MILLING PROCESS ON THE ENERGY CONSUMPTION OF THE MACHINE TOOL
Borkowski, Wojciech
Skoczynski, Waclaw
Piorkowski, Pawel
Jankowski, Tomasz
Roszkowski, Andrzej
Foremniak, Michal
[J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2018, 12 (03): : 24 - 31
[6] Productivity Progression with Tool Wear in Titanium Milling
Menezes, Joyson
Rubeo, Mark A.
Kiran, Kadir
Honeycutt, Andrew
Schmitz, Tony L.
[J]. 44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, 2016, 5 : 427 - 441
[7] EXPERIMENTAL INVESTIGATION OF THE TOOL WEAR AND TOOL LIFE IN MICRO HARD MILLING
Shashidhara, Shreyas
Liu, Xinyu
Zhu, Weihang
Curry, James
Zaloom, Victor
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2A, 2014,
[8] Energy consumption and modeling in precision hard milling
Sealy, M. P.
Liu, Z. Y.
Zhang, D.
Guo, Y. B.
Liu, Z. Q.
[J]. JOURNAL OF CLEANER PRODUCTION, 2016, 135 : 1591 - 1601
[9] Energy consumption characteristics in finish hard milling
Liu, Z. Y.
Sealy, M. P.
Li, W.
Zhang, D.
Fang, X. Y.
Guo, Y. B.
Liu, Z. Q.
[J]. JOURNAL OF MANUFACTURING PROCESSES, 2018, 35 : 500 - 507
[10] Instrumented Milling Process and Analysis for Tool Wear Measurement
Ninevski, Dimitar
Yifrach, Yitzchak
O'Leary, Paul
[J]. 2023 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE, I2MTC, 2023,

← 1 2 3 4 5 →