LOCATING METHOD OF DISTURBANCE SOURCE OF FORCED POWER OSCILLATION BASED ON PRONY ANYASIS

被引:0
|
作者
Gao, Yi [1 ]
Lid, Di-chen [1 ]
Huang, Guan-bin [1 ]
Sri, Qiu-yun [1 ]
机构
[1] Wuhan Univ, Sch Elect Engn, Wuhan, Peoples R China
关键词
Forced power oscillation; Prony analysis; Torque coefficient; Disturbance source; SYNCHRONIZING TORQUES;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The characteristics of modern power grid such as extreme high voltage, large capacity and interconnection network bring a lot of challenges to the security and stabilization of power system in our country. Among them, forced power oscillation is an important problem which widely exists and needs to be studied urgently. And the study of synchronizing torque and damping torque is an important method to analyze low frequency oscillation. In this paper, Firstly, the theoretical analysis of forced power oscillation based on two-machine equivalent system has been done. Secondly, A new Prony analysis of electric torque coefficient (ETC) is proposed as the old method of ETC doesn't work well. Then, the damping torque of the machine considering the engine speed regulation system is analyzed theoretically. Finally, the simulation in the four-machine two regions system is done and the results have verified the feasibility and effectiveness of the new method.
引用
收藏
页数:4
相关论文
共 50 条
  • [1] A Novel Method for Locating Forced Oscillation Source in Mechanical Power Based on Power Spectral Density
    Li S.
    Gan D.
    Luan M.
    Dianwang Jishu/Power System Technology, 2019, 43 (01): : 236 - 243
  • [2] Disturbance source location of forced power oscillation in regional power grid based on dissipation power
    Hu, Wei
    Lin, Tao
    Gao, Yuxi
    Li, Jisheng
    Huang, Yong
    Xu, Xialing
    Gaodianya Jishu/High Voltage Engineering, 2012, 38 (04): : 1006 - 1011
  • [3] Disturbance source identification based on cutset energy and sensitivity for forced power oscillation
    Wang, N. (wangnana668@163.com), 1600, Electric Power Automation Equipment Press (33):
  • [4] Location identification method of disturbance source in forced power oscillation considering unobservability of PMU information
    School of Electrical and Electronic Engineering, North China Electric Power University, Baoding
    071003, China
    不详
    132000, China
    不详
    102200, China
    Dianli Xitong Zidonghue, 10 (56-62):
  • [5] Disturbance source location of forced power oscillation using energy functions
    Yu, Yiping
    Min, Yong
    Chen, Lei
    Zhang, Yiwei
    Dianli Xitong Zidonghua/Automation of Electric Power Systems, 2010, 34 (05): : 1 - 6
  • [6] Locating The Source of Forced Oscillation in Power Systems using System Oscillating Energy
    Jha, Rajiv
    Senroy, Nilanjan
    2018 8TH IEEE INDIA INTERNATIONAL CONFERENCE ON POWER ELECTRONICS (IICPE), 2018,
  • [7] An analysis method for forced power oscillation source detection
    Wang, Maohai
    Sun, Hao
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2014, 34 (34): : 6209 - 6215
  • [8] Forced disturbance-source locating based on phase-angle between power and frequency fluctuations
    Jiang P.
    Zheng B.
    Feng S.
    2017, Electric Power Automation Equipment Press (37): : 112 - 117
  • [9] Implementing Online Oscillation Monitoring and Forced Oscillation Source Locating at Peak Reliability
    Zhang, Hongming
    Ning, Jiawei
    Yuan, Haoyu
    Venkatasubramanian, Vaithianathan
    2019 51ST NORTH AMERICAN POWER SYMPOSIUM (NAPS), 2019,
  • [10] A Method for Locating Wideband Oscillation Disturbance Sources in Power Systems by Integrating TimesNet and Autoformer
    Yan, Huan
    Tai, Keqiang
    Liu, Mengchen
    Wang, Zhe
    Yang, Yunzhang
    Zhou, Xu
    Zheng, Zongsheng
    Gao, Shilin
    Wang, Yuhong
    ELECTRONICS, 2024, 13 (16)