Slide diamond burnishing influence on of surface stereometric structure of an AZ91 alloy

被引：25
|
作者：
Korzynski, M. [1 ]
Zarski, T. [1 ]
机构：
[1] Rzeszow Univ, Fac Math & Nat Sci, Ctr Innovat Technol, Pigonia 1, PL-35959 Rzeszow, Poland
来源：
SURFACE & COATINGS TECHNOLOGY | 2016年 / 307卷
关键词：
Slide diamond burnishing; Surface stereometric structure; Experimental model; CYCLE FATIGUE PERFORMANCE; CORROSION-FATIGUE; STRENGTH; METHODOLOGY; MAGNESIUM; BEHAVIOR;
D O I：
10.1016/j.surfcoat.2016.09.045
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The paper is a study of the surface stereometric structure of AZ91 specimens after slide diamond burnishing using PCD tools. The experimental models describing the influence of the burnishing conditions on Sa and some other non-standard surface parameters were obtained. The results of slide burnishing and those of precise turning were compared by assessing the values of a dozen or so parameters of the surface structure. The correlations between certain surface parameters were revealed. Also, it was established that the application of burnishing makes it possible to achieve a surface roughness of Sa <0.4 mu m as well as good values of many other surface stereometric structure parameters, so this machining process can be used for finishing AZ91 alloy objects. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：590 / 595
页数：6
相关论文
共 50 条
  • [1] Influence of burnishing operations on surface and subsurface properties of AZ31 and AZ91
    Tonshoff, HK
    Friemuth, T
    Podolsky, C
    Winkler, J
    Haferkamp, H
    Niemeyer, M
    Kaese, V
    Janssen, S
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2001, 32 (01) : 62 - 67
  • [2] Surface modification of AZ91 magnesium alloy
    Luan, Benli
    Gray, Joy
    Yang, Lianxi
    Cheong, Woo-Jae
    Shoesmith, David
    2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 : 513 - +
  • [3] Surface modification of the AZ91 magnesium alloy
    Strzelecka, M.
    Iwaszko, J.
    Malik, M.
    Tomczynski, S.
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2015, 15 (04) : 854 - 861
  • [4] The Influence of Solution Treatment on Structure and Performance of AZ91 Magnesium Alloy
    Pu, Zhijun
    Liu, Hening
    Zhang, Kui
    Li, Xinggang
    PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON INFORMATION ENGINEERING FOR MECHANICS AND MATERIALS, 2016, 97 : 295 - 300
  • [5] Influence of Cerium on Corrosion of AZ91 Magnesium Alloy
    刘生发
    康柳根
    刘林艳
    黄尚宇
    韩辉
    吕亚清
    JournalofRareEarths, 2006, (S2) : 222 - 227
  • [6] Influence of surface pretreatment on phosphate conversion coating on AZ91 Mg alloy
    Zhang, Chunyan
    Liu, Bin
    Yu, Baoxing
    Lu, Xiaopeng
    Wei, Yong
    Zhang, Tao
    Mol, J. M. C.
    Wang, Fuhui
    SURFACE & COATINGS TECHNOLOGY, 2019, 359 : 414 - 425
  • [7] Influence of Cerium on Corrosion of AZ91 Magnesium Alloy
    Liu Shengfa 1*
    2. School of Automotive Engineering
    JournalofRareEarths, 2006, (02) : 247 - 247
  • [8] Influence of cerium on corrosion of AZ91 magnesium alloy
    School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
    不详
    J Rare Earth, 2006, SUPPL. 3 (222-227):
  • [9] Corrosion of AZ91 alloy and composite AZ91/SiC in Ringer solution
    Kot, Iwona
    Lelito, Janusz
    Krawiec, Halina
    OCHRONA PRZED KOROZJA, 2012, 55 (03): : 135 - 137
  • [10] Droplet coating of Al coating on AZ91 alloy surface
    Xie, Kun
    Cui, Hongzhi
    Sun, Jinquan
    Xia, Pengcheng
    Yue, Lijie
    Cao, Meiqing
    Chen, Yunbo
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2011, 40 (04): : 661 - 664
12345