A general strategy for geometric error identification of multi-axis machine tools based on point measurement

Geometric error component identification is needed to realize the geometric error compensation which can significantly enhance the accuracy of multi-axis machine tools. Laser tracker has been applied to geometric error identification of machine tools increasingly due to its high capability in 3D metrology. A general method, based on point measurement using a laser tracker is developed for identifying the geometric error components of multi-axis machine tools in this study. By using this method, all the component errors and location errors of each axis (including the linear axis and rotary axis) of the multi-axis machine tools can be measured. Three pre-described targets are fixed on the stage of the under-test axis which moves step by step. The coordinates of the three targets at every step are determined by a laser tracker based on the sequential multilateration method. The volumetric errors of these three target points at each step can be obtained by comparing the measured values of the target points' coordinates with the ideal values. Then, nine equations can be established by inversely applying the geometric error model of the axis under test, which can explicitly describe the relationship between the geometric error components and volumetric error components, and then the component errors of this axis can be obtained by solving these equations. The location errors of the axis under test can be determined through the curve fitting. In brief, all the geometric error components of a single axis of multi-axis machine tools can be measured by the proposed method. The validity of the proposed method is verified through a series of experiments, and the experimental results indicate that the proposed method is capable of identifying all the geometric error components of multi-axis machine tools of arbitrary configuration.