Influence of crystal plane on the welding quality of YBCO bulk superconductor

被引:3
|
作者
Sefcikova, M. [1 ]
Diko, P. [1 ]
Bozzo, B. [2 ]
Granados, X. [2 ]
Obradors, X. [2 ]
机构
[1] Slovak Acad Sci, Inst Expt Phys, Kosice 04001, Slovakia
[2] CSIC Campus, Inst Ciencia Mat Barcelona, Bellaterra 08193, Spain
关键词
YBCO superconductors; TSMG; welds; microstructure;
D O I
10.1016/j.mseb.2008.03.006
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The microstructure of welds parallel to the {1 0 0} and the {1 1 0} crystal planes of the single-grain YBa2Cu3O7/Y2BaCuO5 (Y123/Y211) bulk superconductors welded by Ag foil has been studied. It is shown that a zone free of small Y211 particles is formed along the both sides of the welds. Formation of this zone is explained by higher Y content in the melt produced during heating and leaking out of the weld. The different morphology of the rest solidified liquid in the welds, which has a tendency to form films in the {1 0 0} welds and granules in the {1 1 0} welds, is associated with different surface energies of welded surfaces. Cracking suppression of the {1 1 0} welds was observed and is ascribed to higher fracture toughness for this plane. The quality of the weld is confirmed by the trapped field measurements. (c) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:107 / 110
页数:4
相关论文
共 50 条
  • [1] Corrosion of YBCO bulk superconductor in air
    Diko, Pavel
    Piovarci, Samuel
    Antal, Vitaliy
    Kanuchova, Maria
    Volochova, Daniela
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2018, 101 (08) : 3703 - 3709
  • [2] Influence of local superconducting properties on pulsed field magnetization of YBCO bulk superconductor
    Fujiyama, K
    Shiraishi, R
    Ohsaki, H
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2005, 426 : 681 - 687
  • [3] Oxygenation mechanism of TSMG YBCO Bulk Superconductor
    Diko, P.
    Kanuchova, M.
    Chaud, X.
    Odier, P.
    Granados, X.
    Obradors, X.
    Kulik, P.
    Bozzo, B.
    8TH EUROPEAN CONFERENCE ON APPLIED SUPERCONDUCTIVITY (EUCAS'07), 2008, 97
  • [4] Fracture toughness evaluation of YBCO bulk superconductor
    Okudera, T
    Murakami, A
    Katagiri, K
    Kasaba, K
    Shoji, Y
    Noto, K
    Sakai, N
    Murakami, M
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2003, 392 : 628 - 633
  • [5] Oxygenation thermogravimetry of TSMG YBCO bulk superconductor
    Diko, Pavel
    Granados, Xavier
    Bozzo, Bernat
    Kulik, Peter
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 2961 - 2964
  • [6] The Doped YBCO Superconductor Crystal Structure Simulation
    Kavecansky, V.
    Diko, P.
    ACTA PHYSICA POLONICA A, 2010, 118 (05) : 1034 - 1035
  • [7] Vickers hardness properties of YBCO bulk superconductor at cryogenic temperatures
    Yoshino, Y
    Iwabuchi, A
    Noto, K
    Sakai, N
    Murakami, M
    PHYSICA C, 2001, 357 (357-360): : 796 - 798
  • [8] Effect of Anisotropic Magnetization on the Rotational Loss in YBCO Bulk Superconductor
    Yu, Long
    Yang, Wenjiang
    Jiao, Yulei
    Ye, Mao
    Liu, Yu
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2015, 25 (03)
  • [9] Observation of pulsed field magnetization process for a YBCO bulk superconductor
    Fukuoka, K
    Hashimoto, M
    NON-LINEAR ELECTROMAGNETIC SYSTEMS - ISEM '99, 2000, : 203 - 206
  • [10] Estimation of the shielding current distribution in levitated YBCO bulk superconductor
    Nishikawa, T
    Komano, Y
    Sawa, K
    Iwasa, Y
    Yamachi, N
    Murakami, M
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2003, 392 : 634 - 638