Improving Machining Accuracy of Thin-Wall Parts Using the Information-Localizing Technology

被引：2

作者：

Liu, H. B. ^{[1
]}

Hou, B. ^{[1
]}

Zhang, J. ^{[1
]}

Wang, Y. Q. ^{[1
]}

机构：

[1] Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China

来源：

INTELLIGENT ROBOTICS AND APPLICATIONS (ICIRA 2015), PT II | 2015年 / 9245卷

关键词：

Machining accuracy; Thin-walled structures; Information-localizing; fiducial; SIMULATION;

D O I：

10.1007/978-3-319-22876-1_61

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

The thin-walled structures always tend to distort and deform during machining due to its low rigidity, which will influence the tolerance characteristics of the final product. Thus, to control machining accuracy of is very challenging. This paper focuses on a solution to this problem, an information-localizing method for machining large thin-wall structures is proposed. Further, a fiducial correction algorithm is used to compensate the machining deformation error. Finally, the experiments were carried out, and the results indicated that the proposed method can improve the machining accuracy.

引用

页码：701 / 709

页数：9

共 50 条

[1] ANALYSIS OF DEFORMATIONS OF THIN-WALL PARTS IN MACHINING
Slusarczyk, L.
[J]. PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH-ENERGY PHYSICS EXPERIMENTS 2015, 2015, 9662
[2] TEMPORARY STIFFENING OF THIN-WALL PARTS FOR MACHINING
KUKLEV, LS
[J]. SOVIET ENGINEERING RESEARCH, 1983, 3 (10): : 93 - 94
[3] Finite element analysis of machining thin-wall parts
Izamshah, R.A.R.
Mo, John P.T
Ding, Songlin
[J]. Key Engineering Materials, 2011, 458 : 283 - 288
[4] Research on a thin-walled part manufacturing method based on information-localizing technology
Wang, Yongqing
Hou, Bo
Wang, Fengbiao
Ji, Zhichao
Liang, Zhao
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2017, 231 (22) : 4099 - 4109
[5] Model construction of complex thin-wall structure parts for adaptive machining
Feng, Yazhou
Ren, Junxue
Liu, Zhanfeng
Han, Xiaolan
[J]. Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2021, 42 (10):
[6] Research on an intelligent manufacturing system based on an information-localizing machining mode
Zhou, K
Zhao, JS
Mao, DZ
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 597 - 602
[7] HIPS FOR THIN-WALL PARTS
不详
[J]. PLASTICS TECHNOLOGY, 1983, 29 (03) : 59 - 59
[8] Intelligent Clamping Technology for Machining Deformation and Vibration Control of Thin-wall Parts:A Review of Recent Progress
面向薄壁零件加工变形与振动控制的智能装夹技术研究进展
[J]. Zhang, Ying (zhangyingcdim@nwpu.edu.cn); Zhang, Ying (zhangyingcdim@nwpu.edu.cn), 1600, Chinese Mechanical Engineering Society (57): : 21 - 34
[9] A comprehensive error compensation approach considering machining process for complex thin-wall parts machining
Yang, Jianhua
Zhang, Dinghua
Wu, Baohai
[J]. Zhang, Dinghua, 1600, Chinese Society of Astronautics (35): : 3174 - 3181
[10] A model of deformation of thin-wall surface parts during milling machining process
Wang Ling-yun
Huang Hong-hui
West, Rae W.
Li Hou-jia
Du Ji-tao
[J]. JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2018, 25 (05) : 1107 - 1115

← 1 2 3 4 5 →