High Speed Machining of AISI 1050 Steel: Modelling and Experimental

被引：6
|
作者：
Soldani, X. [1 ]
Moufki, A. [1 ]
Molinari, A. [1 ]
Budak, E. [2 ]
Ozlu, E. [2 ]
机构：
[1] Lab Phys & Mecan Mat, Metz, France
[2] Sabanci Univ, Fac Engn & Nat Sci, Istanbul, Turkey
来源：
INTERNATIONAL JOURNAL OF MATERIAL FORMING | 2008年 / 1卷 / Suppl 1期
关键词：
High speed machining; modelling; friction;
D O I：
10.1007/s12289-008-0107-z
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An analytical approach is used to model orthogonal cutting process. The material characteristics such as strain rate sensitivity, strain hardening and thermal softening are considered. The chip formation is supposed to occur mainly by shearing within a thin band called primary shear zone. The analysis is limited to stationary flow and the material flow within the primary shear zone is modelled by using a one-dimensional approach. Thermomechanical coupling and inertia effects are accounted for. At the tool-chip interface, a temperature dependent friction law is introduced to take account of the extreme conditions of pressure, velocities and temperature encountered during machining. Comparisons between model predictions and experimental results are performed for different cutting conditions.
引用
收藏
页码：1439 / 1441
页数：3
相关论文
共 50 条
  • [1] High Speed Machining of AISI 1050 Steel: Modelling and Experimental
    X. Soldani
    A. Moufki
    A. Molinari
    E. Budak
    E. Özlü
    [J]. International Journal of Material Forming, 2008, 1 : 1439 - 1441
  • [2] High Speed Machining of AISI 52100 Steel
    Liu, Y. J.
    Huang, J. B.
    Qing, M. Y.
    Xia, W.
    Tang, Y.
    [J]. ULTRA-PRECISION MACHINING TECHNOLOGIES, 2009, 69-70 : 466 - 470
  • [3] Experimental and Finite Element Analyses for High-Speed Machining of AISI 4340 steel with ZTA Insert
    Mazumder S.
    Ghosh K.
    Singh B.K.
    Chakraborty S.S.
    Mandal N.
    [J]. Journal of The Institution of Engineers (India): Series C, 2023, 104 (02) : 261 - 270
  • [4] Experimental Study on the High Speed Machining of Hardened Steel
    Begic-Hajdarevic, Derzija
    Cekic, Ahmet
    Kulenovic, Malik
    [J]. 24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013, 2014, 69 : 291 - 295
  • [5] Material behaviour of aluminium 7075 and AISI 1045 steel in high speed machining
    Siems, S
    Dollmeier, R
    Warnecke, G
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTE OF SME, VOL XXVIII, 2000, 2000, : 101 - 106
  • [6] ON THE CATASTROPHIC SHEAR INSTABILITY IN HIGH-SPEED MACHINING OF AN AISI 4340 STEEL
    KOMANDURI, R
    SCHROEDER, T
    HAZRA, J
    VONTURKOVICH, BF
    FLOM, DG
    [J]. JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1982, 104 (02): : 121 - 131
  • [7] Evaluation of neural network parameters in the prediction of AISI 1050 steel machining performance
    Sada, S. O.
    Eyenubo, O. J.
    Atikpo, E.
    Enyi, C. L.
    [J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2023, 9 (04) : 1475 - 1486
  • [8] Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation
    Maranhao, C.
    Davim, J. Paulo
    [J]. SIMULATION MODELLING PRACTICE AND THEORY, 2010, 18 (02) : 139 - 156
  • [9] Investigation of the Effects of Microgrooved Cutting Tool in High Speed Machining of AISI 1045 Steel
    Chen, Xingbang
    Duong, Nick H.
    Ma, J.
    Lei, Shuting
    [J]. PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1, 2017,
  • [10] Experimental investigation on the high-speed machining of hardened steel
    Quan, YM
    Wang, CY
    He, ZW
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 : 339 - 343
12345