Heat Transfer Enhancement and Pressure Drop for R417A Flow Boiling in Internally Grooved Tubes

被引:0
|
作者
Zhang, Xiaoyan [1 ]
机构
[1] Xian Univ Sci & Technol, Inst Energy Engn, Xian 710054, Peoples R China
关键词
R417A; Evaporation; Heat transfer; Internally grooved tubes; Enhancement factors; TRANSFER COEFFICIENTS; HORIZONTAL SMOOTH; R407C; R22; R410A;
D O I
10.4028/www.scientific.net/AMR.354-355.732
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
An experimental investigation of evaporation for R417A in horizontal smooth and internally grooved tubes has been carried out. Based on the experimental results, performance of heat transfer and pressure drop for R417A flow boiling in different tubes was analyzed, and the influences of micro-fin parameters and mass fluxes on heat transfer enhancement factors and pressure drops were discussed. The results indicate: the enhancement effect of Tube III having the narrower spirally grooves excels than Tube II, and the enhancement factors increase with the increasing mass flux. R417A produces slightly bigger pressure drops in Tube II than Tube III, and the pressure drops increase with the increasing mass flux and vapor quality, this increase is more obvious in internally grooved tubes.
引用
收藏
页码:732 / 738
页数:7
相关论文
共 50 条
  • [1] Heat transfer enhancement and pressure drop performance for R417A flow boiling in internally grooved tubes
    Zhang, Xiaoyan
    Zhang, Jin
    Ji, Haiwei
    Zhao, Dengyu
    [J]. ENERGY, 2015, 86 : 446 - 454
  • [2] Evaporation heat transfer of R417A flowing inside horizontal smooth and internally grooved tubes
    Zhang, Xiaoyan
    Yuan, Xiuling
    Tian, Huaizhang
    [J]. Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2007, 41 (01): : 18 - 22
  • [3] Heat transfer characteristics for evaporation of R417A flowing inside horizontal smooth and internally grooved tubes
    Zhang, Xiaoyan
    Zhang, Xingqun
    Chen, Yunguang
    Yuan, Xiuling
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2008, 49 (06) : 1731 - 1739
  • [4] Heat transfer and enhancement analyses of flow boiling for R417A and R22
    Zhang, Xiaoyan
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2011, 35 (07) : 1334 - 1342
  • [5] PRESSURE DROP AND HEAT TRANSFER INSIDE THE COILED FLOW CHANNEL OF SMOOTH TUBES AND INTERNALLY HELICAL-GROOVED TUBES
    Inoue, Norihiro
    Iku, Shinitsu
    Watanabe, Kazuhide
    [J]. INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION, 2012, 20 (04)
  • [6] Flow Regimes and Evaporative Heat Transfer Coefficients for Flow Boiling in Smooth and Internally-Grooved Tubes
    Sharar, Darin J.
    Bar-Cohen, Avram
    [J]. 2016 15TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM), 2016, : 781 - 790
  • [7] BOILING HEAT-TRANSFER AND PRESSURE-DROP IN INTERNAL SPIRAL-GROOVED TUBES
    ITO, M
    KIMURA, H
    [J]. BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1979, 22 (171): : 1251 - 1257
  • [8] Comparison of R407C and R417A heat transfer coefficients and pressure drops during flow boiling in a horizontal smooth tube
    Aprea, C.
    Greco, A.
    Rosato, A.
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2008, 49 (06) : 1629 - 1636
  • [9] Heat transfer and single-phase flow in internally grooved tubes
    Aroonrat, K.
    Jumpholkul, C.
    Leelaprachakul, R.
    Dalkilic, A. S.
    Mahian, O.
    Wongwises, S.
    [J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2013, 42 : 62 - 68
  • [10] ENHANCEMENT OF SATURATED BOILING HEAT-TRANSFER BY INTERNALLY FINNED TUBES
    AZER, NZ
    SIVAKUMAR, V
    [J]. ASHRAE JOURNAL-AMERICAN SOCIETY OF HEATING REFRIGERATING AND AIR-CONDITIONING ENGINEERS, 1983, 25 (12): : 55 - 55