Corrosion behaviour of CrN/Cr multilayers on stainless steel deposited by unbalanced magnetron sputtering

被引:73
|
作者
Chipatecua, Y. L. [1 ]
Olaya, J. J. [1 ]
Arias, Diego F. [2 ]
机构
[1] Univ Nacl Colombia, Fac Engn, Mech & Mechatron Engn Dept, Bogota 14490, Colombia
[2] Univ Nacl Colombia, Dept Phys, Fac Sci, Manizales, Colombia
关键词
Corrosion; CrN/Cr; Multilayers; Sputtering; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; CHROMIUM NITRIDE COATINGS; NACL AQUEOUS-SOLUTION; PVD COATED STEELS; TIN/TI MULTILAYERS; BILAYER PERIOD; HARD COATINGS; WEAR BEHAVIOR; RESISTANCE; FILMS;
D O I
10.1016/j.vacuum.2012.01.016
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper reports the results of the influence of bilayer period (A) and total thickness (f) on the corrosion resistance of magnetron-sputtered CrN/Cr multilayers. Corrosion tests were carried out by potentiodynamic polarization with 0.5 M H2SO4 + 0.05 M KSCN solution and electrochemical impedance spectroscopy (EIS) with 3% NaCl solution. Measurements were also taken on the uacoated substrate and hard chromium coatings for comparison. Multilayer microstructure and morphology were studied by X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) and chemical composition was studied by energy dispersive X-ray analysis (EDX). The experiments showed that CrN/Cr coatings having lower bilayer period and lower thickness increased their efficiency as a barrier and improved the corrosion resistance of all coatings evaluated. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1393 / 1401
页数:9
相关论文
共 50 条
  • [1] Comparison of corrosion resistance of Cr/Crn and Cr/Crn/CrAlN coatings deposited by magnetron sputtering
    Song, Xiao-Xiao
    Ouyang, Jun-Jie
    Zhao, Jie-Yu
    Hu, Deng-Ke
    Chen, Ya-Jun
    Surface Technology, 2020, 49 (02): : 272 - 280
  • [2] PRODUCTION AND CHARACTERIZATION OF Cr AND CrN HARD COATINGS DEPOSITED BY UNBALANCED MAGNETRON SPUTTERING
    Lopez, Monica B.
    MOMENTO-REVISTA DE FISICA, 2013, (46): : 38 - 50
  • [3] Erosion-corrosion wear of Cr/CrN multi-layer coating deposited on AISI-304 stainless steel using the unbalanced magnetron (UBM) sputtering system
    Alegria-Ortega, J. A.
    Ocampo-Carmona, L. M.
    Suarez-Bustamante, F. A.
    Olaya-Florez, J. J.
    WEAR, 2012, 290 : 149 - 153
  • [4] ELECTRICAL PROPERTIES OF Cr/CrN NANO-MULTILAYERS PRODUCED BY THE UNBALANCED MAGNETRON SPUTTERING TECHNIQUE
    Marulanda Cardona, Diana Maritza
    Olaya Florez, Jhon Jairo
    DYNA-COLOMBIA, 2011, 78 (168): : 53 - 57
  • [5] Porosity Ratio and Anti-corrosion Properties of Cr/CrN Films Synthesized by Unbalanced Magnetron Sputtering
    Wu, Yanping
    Leng, Yongxiang
    Gui, Xian
    Sun, Hong
    Huang, Nan
    Zhu, Shengfa
    Zhang, Pengcheng
    Bai, Bin
    MATERIALS RESEARCH, PTS 1 AND 2, 2009, 610-613 : 647 - 651
  • [6] Oxidation Behaviour of Nanoscale Multilayer CrAlYN/CrN Coatings Deposited by the Combined High Power Impulse Magnetron Sputtering/Unbalanced Magnetron Sputtering Technique
    Reinhard, Christina
    Ehiasarian, Arutiun P.
    Hovsepian, Papken Eh
    PLASMA PROCESSES AND POLYMERS, 2007, 4 : S910 - S915
  • [7] The relation between the plasma characteristic and the corrosion properties of TiN/Ti multilayers deposited by unbalanced magnetron sputtering
    Flores, M
    Muhl, S
    Andrade, E
    THIN SOLID FILMS, 2003, 433 (1-2) : 217 - 223
  • [8] Temperature effect on structural, mechanical properties and corrosion behaviour of CrN thin films deposited by magnetron sputtering
    Abdallah, Bassam
    Kakhia, Mahmoud
    Alssadat, Walied
    Zetoun, Walaa
    MICRO & NANO LETTERS, 2020, 15 (10) : 678 - 683
  • [9] CrAlYN/CrN superlattice coatings deposited by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique
    Hovsepian, P. Eh.
    Reinhard, C.
    Ehiasarian, A. P.
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (07): : 4105 - 4110
  • [10] Stainless steel films deposited by de unbalanced magnetron sputtering using SUS304 steel target
    Inoue, S
    Saeki, T
    Koterazawa, K
    Uchida, H
    Iwasa, M
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2000, 64 (12) : 1218 - 1223