Development of the quench protection system for the CFETR CS model coil

The Central Solenoid (CS) model coil, which is responsible for developing and verifying the larger-scale superconducting magnet technology of China Fusion Engineering Test Reactor (CFETR), has been designed and is currently being manufactured at ASWP. The energy storage of the CS model coil is 407MJ, so a reliable quench protection system is needed to ensure the safety of the coil when a quench occurs. This paper describes the progress of the quench protection system. The two-stage commutating current technique is used to solve the difficulties that the breaker cannot directly break the high DC current. For the key components in the circuit, the prototype of the breaker was manufactured and the performance test was carried out. The engineering design and manufacture of the discharge resistor were carried out. An experimental study of the quench protection circuit was carried out to verify the feasibility of the design. Besides, the reliability of the quench protection control system is qualitatively analyzed based on the fault tree.