Design Process and Topology Comparison for a High Performance PM-Machine for Sustainable Traction Drive Technology

被引：0
|
作者：
Domann, Nils [1 ]
Canders, Wolf-Ruediger [1 ]
Henke, Markus [1 ]
机构：
[1] Tech Univ Carolo Wilhelmina Braunschweig, Inst Elect Machines Drives & Tract, D-38106 Braunschweig, Germany
来源：
2013 8TH INTERNATIONAL CONFERENCE AND EXHIBITION ON ECOLOGICAL VEHICLES AND RENEWABLE ENERGIES (EVER) | 2013年
关键词：
D O I：
暂无
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
In this paper a design process for an electric machine is presented. With the focus on PM-machines with tooth-coil windings a new design methology is explained to identify the most interesting windings for a certain application. By adapting a special methodology multiple winding configurations are found. This process is applied to the design of a main drive for an electric vehicle. Different winding topologies are identified and compared. Especially a six-phase topology is introduced and analysed. The strengths and weaknesses of the investigated designs are explained and discussed.
引用
收藏
页数：6
相关论文
共 35 条
  • [1] An Overview of PM Synchronous Machine Design Solutions for Enhanced Traction Performance
    Vidanalage, Buddhika De Silva Guruwatta
    Mukundan, Shruthi
    Li, Wenlong
    Kar, Narayan C.
    2020 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), VOL 1, 2020, : 1697 - 1703
  • [2] Design of a Distributed Winding on a Ceramic Carrier for an Ironless, High Speed Axial-Flux PM-Machine
    Micklitz, Tobias
    Hofmann, Wilfried
    2017 20TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2017,
  • [3] Development and Design of a High Performance Traction Machine for the FreedomCar 2020 Traction Machine Targets
    Walker, Adam
    Galea, Michael
    Gerada, David
    Gerada, Chris
    Mebarki, Abdeslam
    Brown, Neil
    2016 XXII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2016, : 1611 - 1617
  • [4] Brushless Traction PM Machines Using Commercial Drive Technology, Part I: Design Methodology and Motor Design
    Kazmin, Evgeny V.
    Lomonova, Elena A.
    Paulides, Johannes J. H.
    ICEMS 2008: PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1- 8, 2008, : 3801 - 3809
  • [5] Improved Design of Outer Rotor Machine in PM Technology for Motor Bike Drive Application
    Mbadiwe, Enwelum, I
    Sulaiman, Erwan
    2018 IEEE SYMPOSIUM ON COMPUTER APPLICATIONS & INDUSTRIAL ELECTRONICS (ISCAIE 2018), 2018, : 167 - 172
  • [6] Design and Analysis of a High-Speed Induction Machine as Electric Vehicle Traction Drive
    Epskamp, Torsten
    Butz, Benjamin
    Doppelbauer, Martin
    2016 18TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE'16 ECCE EUROPE), 2016,
  • [7] Performance Comparison Between Ferrite-ASynRM and Interior PM Machine Drives for Traction Applications
    Ge, Yibo
    Hu, Yaohua
    Zhu, Shushu
    2019 22ND INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2019), 2019, : 535 - 540
  • [8] Optimal Design of Rotor Topology of PM Synchronous Machine for High Speed Electric Tools
    Suo, Chao
    Yang, Kai
    Xiao, Guoliang
    Tu, Wenyi
    Tang, Lixun
    2017 20TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2017,
  • [9] Electric Machine Torque Performance using Segmented Rotor and PM Technology for Direct Drive Vehicle Application
    Mbadiwe, Enwelum, I
    Naufal, Syed Muhammad
    Jusoh, Laili Iwani
    Sulaiman, Erwan
    2019 IEEE INTERNATIONAL CONFERENCE ON AUTOMATIC CONTROL AND INTELLIGENT SYSTEMS (I2CACIS), 2019, : 118 - 122
  • [10] DESIGN AND PERFORMANCE EVALUATION OF A MEDIUM POWER PM-ASSISTED RELUCTANCE SYNCHRONOUS TRACTION MACHINE USING BONDED PM-SHEETS
    Sibande, S. E.
    Kamper, M. J.
    Wang, R.
    SAIEE AFRICA RESEARCH JOURNAL, 2006, 97 (01): : 14 - 21
1234