Design and Implementation of Real-Time Kitchen Monitoring and Automation System Based on Internet of Things

被引:2
|
作者
Ul Hassan, Ch Anwar [1 ]
Iqbal, Jawaid [2 ]
Khan, Muhammad Sufyan [3 ]
Hussain, Saddam [4 ]
Akhunzada, Adnan [5 ]
Ali, Mudabbir [6 ]
Gani, Abdullah [7 ]
Uddin, Mueen [5 ]
Ullah, Syed Sajid [8 ,9 ]
机构
[1] Air Univ, Dept Creat Technol, Islamabad 44000, Pakistan
[2] Capital Univ Sci & Technol, Dept Software Engn, Islamabad 44000, Pakistan
[3] COMSATS Univ Islamabad, Dept Comp Sci, Islamabad 44000, Pakistan
[4] Univ Brunei Darussalam, Sch Digital Sci, Jalan Tungku Link, BE-1410 Gadong, Brunei
[5] Univ Doha Sci & Technol, Coll Comp & Informat Technol, Doha 24449, Qatar
[6] Fed Urdu Univ Arts Sci & Technol, Dept Comp Sci, Islamabad 44000, Pakistan
[7] Univ Malaysia Sabah, Fac Comp & Informat, Kota Kinabalu 88400, Sabah, Malaysia
[8] Univ Agder UiA, Dept Informat & Commun Technol, N-4898 Grimstad, Norway
[9] Villanova Univ, Dept Elect & Comp Engn, Villanova, PA 19085 USA
关键词
Internet of Things; smart kitchen; monitoring system; automation system; home appliances;
D O I
10.3390/en15186778
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Automation can now be found in nearly every industry. However, home automation has yet to reach Pakistan. This paper presents an Internet of Things smart kitchen project that includes automation and monitoring. In this project, a system was developed that automatically detects the kitchen temperature. It also monitors the humidity level in the kitchen. This system includes built-in gas detection sensors that detect any gas leaks in the kitchen and notify the user if the gas pressure in the kitchen exceeds a certain level. This system also allows the user to remotely control appliances such as freezers, ovens, and air conditioners using a mobile phone. The user can control gas levels using their phone with this system. In this paper, the ESP32, DHT11 Sensor, 5 V Relay X 8, and MQ-135 gas sensors create a smart kitchen by controlling the temperature, managing humidity, and detecting gas leakage. The system was built on an Arduino board that is connected to the Internet. The hardware was integrated and programmed using an Arduino, and a user Android application was developed. The project's goal is to allow any Android smartphone to remotely control devices. This method is commonly used in homes, businesses, and grocery stores. Users will be able to control all of their instruments from anywhere, including switches, fans, and lights. Furthermore, simulation was performed using Matlab2016b on multiple houses. In the simulation, not only was the kitchen considered, but also two, four, and six houses. Each house has two bedrooms, one living room, one guest room, two bathrooms, and one kitchen. The results revealed that using this system will have a scientifically significant impact on electricity consumption and cost. In the case of the houses, the cost was USD 33.32, 32.64, 22.32, and 19.54 for unscheduled, two, four, and six houses, respectively. Thus, it was observed that the cost and power are directly proportional to each other. The results reveal that the proposed solution efficiently reduces the cost as compared to that of unscheduled houses.
引用
收藏
页数:16
相关论文
共 50 条
  • [1] Design and Implementation of Intelligent Kitchen System based on Internet of Things
    Sun Jian-mei
    Wang Li-juan
    Yu Xi
    Yang Jun-shan
    [J]. 2018 INTERNATIONAL CONFERENCE ON SMART GRID AND ELECTRICAL AUTOMATION (ICSGEA), 2018, : 253 - 256
  • [2] Automation and Monitoring Smart Kitchen Based on Internet of Things (IoT)
    Nugroho, F.
    Pantjawati, A. B.
    [J]. INTERNATIONAL SYMPOSIUM ON MATERIALS AND ELECTRICAL ENGINEERING (ISMEE) 2017, 2018, 384
  • [3] A System Based on the Internet of Things for Real-Time Particle Monitoring in Buildings
    Marques, Goncalo
    Ferreira, Cristina Roque
    Pitarma, Rui
    [J]. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH, 2018, 15 (04)
  • [4] The vital signs real-time monitoring system based on Internet of things
    Shu, Minglei
    Tang, Meiyu
    Yang, Ming
    Wei, Nuo
    [J]. 2017 4TH INTERNATIONAL CONFERENCE ON INFORMATION SCIENCE AND CONTROL ENGINEERING (ICISCE), 2017, : 747 - 751
  • [5] A general architecture for a real-time monitoring system based on the internet of things
    Paudel, Nilakantha
    Neupane, Ram C.
    [J]. INTERNET OF THINGS, 2021, 14
  • [6] Design and Implementation of a Vibration-Based Real-Time Internet of Things Framework for Road Condition Monitoring
    Abdelraheem, Mohamed
    Hassan, Muhammad
    Alyousify, Mahmoud A.
    Hussein, Ali
    Nassr, Amr A.
    [J]. IEEE OPEN JOURNAL OF VEHICULAR TECHNOLOGY, 2023, 4 : 867 - 876
  • [7] The Design of a Real-time Monitoring System for Soil Salinization Prevention based on the Internet of Things Concept
    Chen Guangquan
    Fu Tengfei
    Xu Xingyong
    Liu Wenquan
    [J]. PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON INFORMATION TECHNOLOGY AND MANAGEMENT INNOVATION, 2015, 28 : 1035 - 1040
  • [8] Monitoring System Design And Implementation Based On The Internet Of Things
    Xu Jianguo
    Xu Gang
    Yan Mengmeng
    [J]. 2013 FOURTH INTERNATIONAL CONFERENCE ON DIGITAL MANUFACTURING AND AUTOMATION (ICDMA), 2013, : 801 - 804
  • [9] Design and Implementation of Smart Environment Monitoring and Analytics in Real-Time System Framework Based on Internet of Underwater Things and Big Data
    Berlian, Muhammad Herwindra
    Sahputra, Tegar Esa Rindang
    Ardi, Buyung Jofi Wahana
    Dzatmika, Luhung Wahya
    Besari, Adnan Rachmat Anom
    Sudibyo, Rahardhita Widyatra
    Sukaridhoto, Sritrusta
    [J]. 2016 INTERNATIONAL ELECTRONICS SYMPOSIUM (IES), 2016, : 403 - 408
  • [10] Design of real-time monitoring platform for internet of things based on cloud platform
    Wang, Shengjie
    Yan, Hairong
    [J]. PROCEEDINGS OF 2020 IEEE 5TH INFORMATION TECHNOLOGY AND MECHATRONICS ENGINEERING CONFERENCE (ITOEC 2020), 2020, : 61 - 64