Aerodynamic Thermodynamic Modeling and Simulation of Turbofan Engine

The mathematical model of turbofan engine is established and simulation calculation is carried out in this paper. An engine component model is established by means of the gas flow path of the engine. Then, according to the common working conditions, common working equations are established and the N+1 residual method is used to solve the nonlinear equations. The general model of an engine is established based on the design point parameters, and the specific performance parameters of the intermediate state are calculated under standard atmospheric conditions. The simulation results are compared with the measured performance data of the engine, which shows that: there are errors between the calculated value of the model and the measured value of the engine. The maximum error is 2.85%, which meets the requirement of model error less than 3% in general engineering.