Characterization of Machined Surface by EDM for Al/B4Cp Composite Material

被引：2
|
作者：
Kasman, S. [1 ]
Guleryuz, L. Feray [2 ]
Ozan, S. [2 ]
Ipek, R. [2 ]
机构：
[1] Dokuz Eylul Univ, Izmir Vocat Sch, Dept Tech Programs, Izmir, Turkey
[2] Ege Univ, Dept Mech Engn, Fac Engn, Izmir, Turkey
来源：
ACTA PHYSICA POLONICA A | 2013年 / 123卷 / 02期
关键词：
D O I：
10.12693/APhysPolA.123.224
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
In this study, electrical discharge machining process was performed to investigate the machinability of Al/B4Cp metal matrix composites manufactured by powder metallurgy. For this, an experimental layout was conducted by using full factorial design. In the analysis, there are three parameters of which one is at three levels and the remaining are two levels. Totally, 48 experiments were carried out. The surface roughness (R-a) was increased with increasing the current (C), pulse-on-time (T-on), pulse-off-time (T-off) and amount of particle (PR). DOT: 10.12693/APhysPolA.123.224
引用
收藏
页码：224 / 226
页数：3
相关论文
共 50 条
  • [1] EDM of hybrid Al–SiCp–B4Cp and Al–SiCp–Glassp MMCs
    A. Riaz Ahamed
    P. Asokan
    S. Aravindan
    [J]. The International Journal of Advanced Manufacturing Technology, 2009, 44 : 520 - 528
  • [2] Critical Conditions of Dynamic Recrystallization for B4Cp/6061Al Composite
    Liu Shengpu
    Li Defu
    Guo Shengli
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (07) : 1815 - 1820
  • [3] Microstructure and properties of B4Cp/Al composite prepared by microwave sintering with low temperature
    Wang, Hongming
    Tang, Feng
    Li, Guirong
    Zhang, De
    Liu, Ming
    Kai, Xizhou
    [J]. MATERIALS RESEARCH EXPRESS, 2020, 7 (09)
  • [4] Pre-thermomechanical treatment of WCp/B4Cp/6063Al composite
    Ma, Shu-Wang
    Yang, Jian
    Liu, Kun
    Sun, Bo
    Mao, Chang-Hui
    [J]. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, 32 (07): : 12 - 16
  • [5] Effects of shear deformation on grain size and mechanical properties of the forged B4Cp/Al composite
    Gong, Dongmei
    Xu, Feng
    Shi, Wenchao
    Chen, An
    [J]. MATERIALS TESTING, 2023, 65 (12) : 1753 - 1757
  • [6] Effect of Feed Rate on Tool Wear in Milling of Al-4% Cu/B4Cp Composite
    Ubeyli, Mustafa
    Acir, Adem
    Karakas, M. Serdar
    Ogel, Bilgehan
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (08) : 865 - 870
  • [7] Tensile property and fracture mechanism of a neutron absorbing B4Cp/Al composite at elevated temperatures
    Gao, Minqiang
    Song, Xinyue
    Wang, Changfeng
    Fu, Ying
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 848
  • [8] Tribomechanical behavior of B4Cp reinforced Al 359 composites
    Ramasamy, Deivasigamani
    Subramanian, Mohan Kumar
    Kaliyannan, Gobinath Velu
    Durairaj, Jayanth
    Rathanasamy, Rajasekar
    Palaniappan, Sathish Kumar
    [J]. MATERIALS TESTING, 2017, 59 (02) : 172 - 177
  • [9] An Investigation of WEDM Process Parameters on the Surface Roughness of Al/B4Cp Metal Matrix Composites
    Ozan, Sertan
    Guleryuz, L. Feray
    Kasman, Sefika
    Ipek, Rasim
    [J]. 2ND INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS, 2012, 1476 : 317 - 320
  • [10] Effect of stress concentration and deformation temperature on the tensile property and damage behavior of a B4Cp/Al composite
    Gao, Minqiang
    Wang, Changfeng
    Yang, Dalong
    Fu, Ying
    Li, Bing
    Guan, Renguo
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 : 2601 - 2610
12345