A Modular SAW Filter Design Approach for Multiband Filtering

被引：2

作者：

Lu, Xiaoming ^{[1
]}

Galipeau, Jeffery ^{[2
]}

Mouthaan, Koenraad ^{[1
]}

Briot, Emmanuelle Henry ^{[2
]}

Abbott, Benjamin ^{[2
]}

机构：

[1] Natl Univ Singapore, ECE Dept, 9 Engn Dr 1, Singapore 117576, Singapore

[2] TriQuint Semicond Florida, Apopka, FL 32703 USA

来源：

2011 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS) | 2011年

关键词：

BANDWIDTH; RESONATOR; NARROW;

D O I：

10.1109/ULTSYM.2011.0329

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper presents two novel modular ladder type surface acoustic wave (SAW) filters. The first topology realizes a shift of center frequency and bandwidth (BW) and the second topology a shift of band edge. In the designs, the acoustic resonators are reused and the need for passive elements is reduced. Experimental results are presented for the 700 MHz frequency band currently allocated to Long Term Evolution (LTE). Parasitics caused by the packaging, interconnect and non-ideal switches are incorporated in the design using a linear circuit solver and three dimensional electro-magnetic (3D EM) commercial simulator. The measured results agree well with the simulations. In the filter with shifted center frequency and BW, two filter states with a BW of 1.4% and 1.7% are realized with a center frequency shift of 3.1%. In the filter with shifted lower band edge, two filter states with a BW of 3% and 1.7% are obtained.

引用

页码：1333 / 1336

页数：4

共 50 条

[1] MULTIBAND SAW FILTER DESIGN USING THE REMEZ EXCHANGE ALGORITHM
CAMPBELL, CK
EDMONSON, PJ
PAPA, JS
[J]. IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1985, 32 (01): : 79 - 79
[2] A Functional Composition Approach to Filter Sharpening and Modular Filter Design
Demirtas, Sefa
Oppenheim, Alan V.
[J]. IEEE TRANSACTIONS ON SIGNAL PROCESSING, 2016, 64 (14) : 3667 - 3676
[3] An iterative approach to design a SAW filter having desired response
Priyanka
Joshi, SD
Panwar, BS
[J]. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2005, 52 (08) : 1422 - 1426
[4] A Novel Multiband Filter Design based on Ring Resonators and DSP Approach
Mokhtari, M. R.
Rostami, G.
Dolatyari, M.
Rostami, A.
[J]. 2015 INTERNATIONAL CONFERENCE ON PHOTONICS, OPTICS AND LASER TECHNOLOGY (PHOTOPTICS), VOL 2, 2015, : 101 - 107
[5] Design and Simulation of a SAW Filter and a New Approach for Bandwidth's Tuning
Sadeghi, M.
Ghayour, R.
Abiri, H.
Karimi, M.
[J]. 2009 IEEE 8TH INTERNATIONAL CONFERENCE ON ASIC, VOLS 1 AND 2, PROCEEDINGS, 2009, : 642 - +
[6] Design of Filtering Microstrip Antenna Using Filter Synthesis Approach
Mansour, Ghaith
Lancaster, Michael J.
Hall, Peter S.
Gardner, Peter
Nugoolcharoenlap, Ekasit
[J]. PROGRESS IN ELECTROMAGNETICS RESEARCH-PIER, 2014, 145 : 59 - 67
[7] OPTIMIZATION TECHNIQUES FOR SAW FILTER DESIGN
KODAMA, T
[J]. IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1980, 27 (03): : 148 - 148
[8] TECHNIQUE FOR SAW BANDPASS FILTER DESIGN
MOULDING, KW
PARKER, DW
[J]. IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1975, SU22 (03): : 230 - 230
[9] ADAPTIVE AND MATCHED FILTERING WITH A SAW FET PROGRAMMABLE TRANSVERSAL FILTER
GREEN, JB
OATES, DE
GRANT, PM
SMYTHE, DL
[J]. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 1987, 34 (03) : 419 - 419
[10] Multiband Digital Filter Design for WCDMA Systems
Suklam, Raweewan
Pirak, Chaiyod
[J]. CIRCUITS, SYSTEM AND SIMULATION, 2011, 7 : 122 - 126

← 1 2 3 4 5 →