The Evaluation of Actual Material Properties of Low Alloy CrMoV Steel from the Results of Small Punch Tests

被引：3
|
作者：
Matocha, Karel [1 ]
Kander, Ladislav [1 ]
Dorazil, Ondrej [1 ]
Guan, Kaishu [2 ]
Xu, Yifen [2 ]
机构：
[1] Mat & Met Res Ltd, Pohranicni 693-31, Ostrava 70300, Czech Republic
[2] East China Univ Sci & Technol, Sch Mech Engn, 130 Mwilong Rd, Shanghai 200237, Peoples R China
来源：
6TH NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS | 2016年 / 12卷
关键词：
SP test; load displacement curve; SP transition temperature T-SP; SP fracture energy E-SP; FATT; empirical correlation;
D O I：
10.1016/j.mspro.2016.03.001
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The Small Punch (SP) test technique is used for the evaluation of actual tensile, fracture and creep characteristics of materials exposed for a long period in operating plant components in order to provide data needed for plant life and integrity assessment. In the present paper the results of SP tests in the temperature range from -193 degrees C to +20 degrees C, carried out in two laboratories on low alloy steel of type 14MoV6-3 in as received state and after long term operation at 540 degrees C were compared. SP transition temperatures T-SP determined from the temperature dependences of the fracture energy were correlated with the FATT temperatures obtained using standardized Charpy V notch test specimens. (C) 2016 Published by Elsevier Ltd.
引用
收藏
页码：1 / 6
页数：6
相关论文
共 50 条
  • [1] Evaluation of toughness and creep properties of aged main valve CrMoV casting steel by using small punch specimens
    Sugimoto, T
    Doki, K
    Komazaki, S
    Misawa, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2005, 91 (04): : 408 - 414
  • [2] Evaluation of toughness and creep properties of aged main valve CrMoV casting steel by using small punch specimens
    Sugimoto, T., 2005, Iron and Steel Institute of Japan (91):
  • [3] Evaluation on high temperature fracture toughness of CrMoV cast steel by small punch testing
    Tanaka, Kenichi
    Amita, Toshio
    Satou, Takashi
    Koba, Kimihiro
    Kusumoto, Junichi
    Kanaya, Akihiro
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2009, 86 (09) : 643 - 648
  • [4] Creep Life Evaluation of Low-alloy Steel Weldment by Small Punch Method
    Kubushiro, K.
    Yoshizawa, H.
    CREEP & FRACTURE IN HIGH TEMPERATURE COMPONENTS: DESIGN & LIFE ASSESSMENT ISSUES, PROCEEDINGS, 2009, : 1113 - 1117
  • [5] On the interpretation of results from small punch creep tests
    Hyde, T. H.
    Stoyanov, M.
    Sun, W.
    Hyde, C. J.
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2010, 45 (03): : 141 - 164
  • [6] Small Punch Tests at Oxide Scales Surface of Structural Steel and Low Silicon Steel
    Jozef Hrabovský
    Ferdinand Dobeš
    Jaroslav Horský
    Oxidation of Metals, 2014, 82 : 297 - 310
  • [7] Small Punch Tests at Oxide Scales Surface of Structural Steel and Low Silicon Steel
    Hrabovsky, Jozef
    Dobes, Ferdinand
    Horsky, Jaroslav
    OXIDATION OF METALS, 2014, 82 (3-4): : 297 - 310
  • [8] SMALL PUNCH TEST EVALUATION OF INTERGRANULAR EMBRITTLEMENT OF AN ALLOY-STEEL
    BAIK, JM
    KAMEDA, J
    BUCK, O
    SCRIPTA METALLURGICA, 1983, 17 (12): : 1443 - 1447
  • [9] SMALL PUNCH TESTING FOR DETERMINING THE MATERIAL TOUGHNESS OF LOW-ALLOY STEEL-COMPONENTS IN-SERVICE
    FOULDS, J
    VISWANATHAN, R
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1994, 116 (04): : 457 - 464
  • [10] Type N damage evaluation of low alloy steel weld joint by small punch creep testing
    Nishioka, T., 1600, Society of Materials Science Japan (62):
12345