Three-Dimensional Flow Simulation for Horizontal Axis Wind Turbine

被引:0
|
作者
Qiu, Ming [1 ]
Zhou, Zhenggui [1 ]
Zhang, Jialing [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Coll Energy, Nanjng, Peoples R China
关键词
Horizontal axis wind turbine; three-dimensional numerical simulation; flow separation; blade loads;
D O I
暂无
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Through three-dimensional flow field calculation for a typical horizontal axis wind turbine, with reference to wind tunnel test data, this article obtains factors that impact accuracy of three-dimensional flow field calculation. These factors include: selection of computational domain and structured grid on the blade surface. With guaranteed calculation accuracy, analysis about three-dimensional flow field was conducted, and the results show that the torsion blade design can reduce attack angle; attack angle increase with velocity of wind flow increasing; great flow speed caused flow separation; horizontal axis wind turbine will work in a state of negative angle of attack with great blade top speed ratio and flow separation reduce the load of the blade surface thus reduce the output power,but the flow separation in the strong velocity of wind flow can prevent blade to damage.
引用
收藏
页码:171 / 175
页数:5
相关论文
共 50 条
  • [1] Three-Dimensional Modeling of a Horizontal Axis Wind Turbine Blade and Profile Effect Analysis
    Jouilel, Naima
    Radouani, Mohammed
    El Fahime, Benaissa
    PROCEEDINGS OF 2016 INTERNATIONAL RENEWABLE & SUSTAINABLE ENERGY CONFERENCE (IRSEC' 16), 2016, : 408 - 412
  • [2] DERIVATION AND VERIFICATION OF THREE-DIMENSIONAL FULL WAKE MODEL OF HORIZONTAL AXIS WIND TURBINE
    Gao X.
    Zhang S.
    Xu S.
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2023, 44 (04): : 203 - 208
  • [3] Research on three-dimensional wake model of horizontal axis wind turbine based on Weibull function
    Li, Ye
    Luo, Zhumei
    Dai, Linsheng
    Ren, Xia
    Liang, Han
    Zhang, Xiaoxu
    JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2024, 16 (04)
  • [4] Three-dimensional simulation of a complete Vertical Axis Wind Turbine using overlapping grids
    Nini, Michele
    Motta, Valentina
    Bindolino, Giampiero
    Guardone, Alberto
    JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, 2014, 270 : 78 - 87
  • [5] Modal Analysis and three-dimensional modeling of 100kW horizontal axis wind turbine blades
    Li, Y. G.
    Wang, L. Y.
    Wang, Z.
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON APPLIED SCIENCE AND ENGINEERING INNOVATION, 2015, 12 : 1313 - 1317
  • [6] Horizontal axis wind turbine numerical simulation of two dimensional angle of attack
    Yu, Jingmei
    Yu, Yanhong
    Liu, Panpan
    HYDRAULIC EQUIPMENT AND SUPPORT SYSTEMS FOR MINING, 2013, 619 : 111 - 114
  • [7] MODELING AND SIMULATION OF A THREE-DIMENSIONAL ADJUSTABLE HORIZONTAL AXIS WIND TURBINE BLADE, USING A COMMERCIAL COMPUTATIONAL FLUID DYNAMICS (CFD) CODE
    Malik, Abdul Wahab
    Uddin, Ing-Naseem
    Ul Haq, Syed M. Hameed
    Khan, M. Faizyab Uddin
    Hayat, Sikandar
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2017, VOL 7, 2018,
  • [8] Three-dimensional modeling and investigation of the flow around a vertical axis wind turbine at different conditions
    Franchina, N.
    Kouaissah, O.
    Persico, G.
    Savini, M.
    RENEWABLE ENERGY, 2022, 199 : 368 - 381
  • [9] Quantification of three-dimensional added turbulence intensity for the horizontal-axis wind turbine considering the wake anisotropy
    Zhang, Shaohai
    Duan, Huanfeng
    Lu, Lin
    He, Ruiyang
    Gao, Xiaoxia
    Zhu, Songye
    ENERGY, 2024, 294
  • [10] A measurement of the three-dimensional near-wake velocity field of a model horizontal-axis wind turbine
    Hu, Danmei
    Ren, Jianxing
    Du, Zhaohui
    CHALLENGES OF POWER ENGINEERING AND ENVIRONMENT, VOLS 1 AND 2, 2007, : 1078 - +