MATHEMATICAL MODELLING OF THERMO-ELASTO-PLASTIC PROBLEMS AND THE SOLVING METHODOLOGY ON THE EXAMPLE OF THE TUBULAR SECTION FORMING PROCESS

被引：1

作者：

Michalczyk, J. ^{[1
]}

Nabialek, M. ^{[1
]}

Szota, M. ^{[1
]}

机构：

[1] Czestochowa Tech Univ, Fac Prod Engn & Mat, 19 Armii Karajowej Str, PL-42200 Czestochowa, Poland

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2016年 / 61卷 / 03期

关键词：

D O I：

10.1515/amm-2016-0268

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The paper presents the results of numerical studies based on a mathematical model determined by the stress-strain state examination method. Numerical computations for two steel grades, namely H40 and C45, were made at similar strain and process rate parameters. As a result of the studies, the distribution of elastic and plastic zones was obtained, while the tube hollow drawing force was verified experimentally. The distribution of longitudinal, radial and circumferential stresses and, after the drawing operation, the distribution of residual stresses in the tube cross-section were also obtained.

引用

页码：1309 / 1315

页数：7

共 14 条

[1] A new theory of constitutive relation for thermo-elasto-plastic problems in porous medium
Wang, JX
Ning, JG
[J]. PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON NONLINEAR MECHANICS, 2002, : 364 - 367
[2] Thermo-elasto-plastic finite element analysis of quenching process of carbon steel
Kang, S. H.
Im, Y. T.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 192 : 381 - 390
[3] BEM Modeling for Stress Sensitivity of Nonlocal Thermo-Elasto-Plastic Damage Problems
Fahmy, Mohamed Abdelsabour
[J]. COMPUTATION, 2024, 12 (05)
[4] FE modeling of thermo-elasto-plastic finite deformation and its application in sheet warm forming
Xing, HL
Makinouchi, A
[J]. ENGINEERING COMPUTATIONS, 2002, 19 (3-4) : 392 - 410
[5] Thermo-elasto-plastic stresses in functionally graded materials under consideration of the fabrication process
Shabana, YM
Noda, N
[J]. ARCHIVE OF APPLIED MECHANICS, 2001, 71 (10) : 649 - 660
[6] Sensitivity analysis and optimisation of thermo-elasto-plastic process with applications to welding side heater design
Michaleris, P
Song, J
[J]. COMPUTATIONAL METHODS AND EXPERIMENTAL MEASUREMENTS XI, 2003, 4 : 33 - 42
[7] NUMERICAL THERMO-ELASTO-PLASTIC ANALYSIS OF RESIDUAL STRESSES ON DIFFERENT SCALES DURING COOLING OF HOT FORMING PARTS
Uebing, S.
Scheunemann, L.
Brands, D.
Schroeder, J.
[J]. XV INTERNATIONAL CONFERENCE ON COMPUTATIONAL PLASTICITY: FUNDAMENTALS AND APPLICATIONS (COMPLAS 2019), 2019, : 223 - 234
[8] Combined macroscopic and microscopic thermo-elasto-plastic stresses of functionally graded plate considering fabrication process
Shabana, YM
Noda, N
Tohgo, K
[J]. JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 2001, 44 (03) : 362 - 369
[9] Thermally-activated hardening recovery of thermo-elasto-plastic metals during annealing: Constitutive modeling for the simulation of welding process
Mouelle, L.
Praud, F.
Chatzigeorgiou, G.
Meraghni, F.
Serri, J.
Fleury, E.
[J]. MECHANICS OF MATERIALS, 2020, 140
[10] Thermo-elasto-plastic stresses in functionally graded materials subjected to thermal loading taking residual stresses of the fabrication process into consideration
Shabana, YM
Noda, N
[J]. COMPOSITES PART B-ENGINEERING, 2001, 32 (02) : 111 - 121

← 1 2 →