BORONISING EFFECT ON THE CORROSION AND WEAR BEHAVIOUR OF AISI 8620 STEEL

被引：0
|
作者：
Yilmaz, E. [1 ]
Ucar, N. [2 ]
Calik, A. [3 ]
Karakas, S. [3 ]
Selbas, R. [1 ]
机构：
[1] Suleyman Demirel Univ, Tech Educ Fac, Dept Mech Educ, TR-32200 Isparta, Turkey
[2] Suleyman Demirel Univ, Dept Phys, Art & Sci Fac, TR-32200 Isparta, Turkey
[3] Suleyman Demirel Univ, Fac Technol, Dept Mfg Engn, TR-32200 Isparta, Turkey
来源：
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION | 2011年 / 17卷 / 04期
关键词：
wear; hardness; boronising; corrosion; AISI; 8620; steel; STAINLESS-STEELS; ABRASIVE WEAR; RUTHENIUM; ADDITIONS; ALLOYS; CARBON;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Corrosion and wear behaviour of boronised and unboronised AISI 8620 steel was investigated by the weight loss method. Corrosion studies were performed with a 10% H2SO4 solution as a corrosive medium at temperatures 273, 298, 333 and 353 K and 2 h immersion period, while wear studies were performed with a gear wear test machine as a function of test time. The obtained results showed that the wear and corrosion behaviour of the steel were improved about 25 and 95 times, respectively, by the boronising treatment compared with the unboronised steel.
引用
收藏
页码：536 / 543
页数：8
相关论文
共 50 条
  • [1] EFFECT OF MARTENSITE VOLUME FRACTION ON THE EROSIVE WEAR BEHAVIOUR OF DUAL-PHASE AISI 8620 STEEL
    Dagasan, E.
    Odabas, D.
    Gercekcioglu, E.
    [J]. JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2008, 14 (04): : 474 - 481
  • [2] Abrasive wear behavior of boronized AISI 8620 steel
    Tabur, M.
    Izciler, M.
    Gul, F.
    Karacan, I.
    [J]. WEAR, 2009, 266 (11-12) : 1106 - 1112
  • [3] Effect of boronising on mechanical properties, wear and corrosion of N80 steel
    An, J.
    Tian, X.
    Lu, Y.
    Sun, S. J.
    Wang, Z. G.
    Hao, W. Q.
    Zhu, X. D.
    Yang, Y. L.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2008, 24 (03) : 314 - 319
  • [4] Effect of post-boronizing heat treatment on wear behaviour and pit formation in AISI-8620 gear steel
    Aydin, Hakan
    Sevim, Vahdettin
    Demirci, A. Halim
    [J]. MATERIALPRUFUNG, 2007, 49 (04): : 200 - 207
  • [5] Effect of boronising on erosion corrosion of mild steel
    Aracic, S
    Esih, I
    Krumes, D
    [J]. CHEMICAL AND BIOCHEMICAL ENGINEERING QUARTERLY, 1998, 12 (04) : 207 - 211
  • [6] Comparison of Hardness and Wear Behaviour of Boronized and Carburized AISI 8620 Steels
    Calik, A.
    Duzgun, A.
    Ekinci, A. E.
    Karakas, S.
    Ucar, N.
    [J]. ACTA PHYSICA POLONICA A, 2009, 116 (06) : 1029 - 1032
  • [7] The combined effect of cryogenic and boronising treatments on the wear behaviour and microstructure of DIN 1.2344 steel
    Mokarian, B.
    Amini, K.
    Ghayour, H.
    Gharavi, F.
    [J]. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2019, 97 (03): : 121 - 128
  • [8] Sliding wear behaviour and its mechanisms of carbonitrided AISI 8620 steel at 100°C under unlubricated conditions
    Sankaran, R.
    Rajamani, D.
    Natarajan, S.
    Thirugnanasambantham, K. G.
    [J]. SURFACE ENGINEERING, 2017, 33 (01) : 42 - 48
  • [9] Wear and mechanical properties of carburized AISI 8620 steel produced by powder metallurgy
    Erden, Mehmet Akif
    Aydin, Fatih
    [J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2021, 28 (03) : 430 - 439
  • [10] Wear Behavior of AISI 8620 Steel Modified by a Pulse-Plasma Technique
    Ozbek, Y. Y.
    Durman, M.
    Akbulut, H.
    [J]. TRIBOLOGY TRANSACTIONS, 2009, 52 (02) : 213 - 222
12345