Improved bake-hardening response of Al-Zn-Mg-Cu alloy through pre-aging treatment

被引：104
|
作者：
Lee, Yun-Soo [1 ]
Koh, Dong-Hyeon [1 ,2 ]
Kim, Hyoung-Wook [1 ,3 ]
Ahn, Yong-Sik [2 ]
机构：
[1] Korea Inst Mat Sci, Metall Mat Div, Chang Won 51508, South Korea
[2] Pukyong Natl Univ, Dept Mat Sci & Engn, Busan 48547, South Korea
[3] Korea Univ Sci & Technol, Dept Adv Mat Engn, Daejeon 34113, South Korea
来源：
SCRIPTA MATERIALIA | 2018年 / 147卷
关键词：
Aluminum alloys; Pre-aging; Precipitation; Mechanical properties; ALUMINUM-ALLOYS; SI ALLOY; MECHANICAL-PROPERTIES; PRECIPITATION KINETICS; BEHAVIOR; STRENGTH; MICROSTRUCTURE; DEFORMATION; SHEET;
D O I：
10.1016/j.scriptamat.2017.12.030
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of pre-aging treatment on the bake-hardening response of an Al-Zn-Mg-Cu alloy was investigated. It was determined that pre-aging immediately after quenching is an effective method to form stabilized Guinier-Preston zones, which can act as precursors to form the metastable eta' phase, and then improve the bake-hardening response. Al-Zn-Mg-Cu alloy sheets pre-aged at 120 degrees C for 30 min retained high ductility, similar to that of their natural-aged condition, and demonstrated high strength after bake-hardening treatment. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：45 / 49
页数：5
相关论文
共 50 条
  • [1] Bake-Hardening Response in a Novel Al-Mg-Si-Cu-Zn Alloy with Pre-Aging
    Zhu, Shang
    Li, Zhihui
    Yan, Lizhen
    Li, Xiwu
    Zhang, Yongan
    Xiong, Baiqing
    [J]. Xiyou Jinshu/Chinese Journal of Rare Metals, 2022, 46 (03): : 281 - 288
  • [2] Reversion of natural ageing and restoration of quick bake-hardening response in Al-Zn-Mg-Cu alloy
    Chunhui Liu
    Zhuangzhuang Feng
    Peipei Ma
    Yihui Zhou
    Guohui Li
    Lihua Zhan
    [J]. Journal of Materials Science & Technology, 2021, 95 (36) : 88 - 94
  • [3] Reversion of natural ageing and restoration of quick bake-hardening response in Al-Zn-Mg-Cu alloy
    Liu, Chunhui
    Feng, Zhuangzhuang
    Ma, Peipei
    Zhou, Yihui
    Li, Guohui
    Zhan, Lihua
    [J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 95 : 88 - 94
  • [4] Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment
    Duan, Xiaoge
    Mi, Zhenli
    Jiang, Haitao
    Wu, Yanxin
    Wang, Jiayi
    [J]. MATERIALS RESEARCH EXPRESS, 2019, 6 (07):
  • [5] Effects of natural aging after pre-aging on clustering and bake-hardening behavior in an Al-Mg-Si alloy
    Aruga, Yasuhiro
    Kozuka, Masaya
    Takaki, Yasuo
    Sato, Tatsuo
    [J]. SCRIPTA MATERIALIA, 2016, 116 : 82 - 86
  • [6] Synergistic improvement in bake-hardening response and natural aging stability of Al-Mg-Si-Cu-Zn alloys via non-isothermal pre-aging treatment
    Li, Gaojie
    Guo, Mingxing
    Du, Jinqing
    Zhuang, Linzhong
    [J]. MATERIALS & DESIGN, 2022, 218
  • [7] Enhanced bake-hardening response of an Al-Mg-Si-Cu alloy with Zn addition
    Guo, M. X.
    Sha, G.
    Cao, L. Y.
    Liu, W. Q.
    Zhang, J. S.
    Zhuang, L. Z.
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2015, 162 : 15 - 19
  • [8] Influence of interrupted quenching and pre-aging on the bake hardening of Al-Mg-Si Alloy
    Ding, Lipeng
    Weng, Yaoyao
    Wu, Sainan
    Sanders, Robert E.
    Jia, Zhihong
    Liu, Qing
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 651 : 991 - 998
  • [9] Pre-aging on early-age behavior and bake hardening response of an Al-0.90Mg-0.80Si-0.64Zn-0.23Cu alloy
    Yan, Lizhen
    Li, Zhihui
    Zhang, Yong-an
    Xiong, Baiqing
    Li, Xiwu
    Liu, Hongwei
    Huang, Shuhui
    Yan, Hongwei
    [J]. PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2016, 26 (04) : 398 - 403
  • [10] Pre-aging on early-age behavior and bake hardening response of an Al-0.90Mg-0.80Si-0.64Zn-0.23Cu alloy
    Lizhen Yan
    Zhihui Li
    Yong-an Zhang
    Baiqing Xiong
    Xiwu Li
    Hongwei Liu
    Shuhui Huang
    Hongwei Yan
    [J]. Progress in Natural Science:Materials International, 2016, 26 (04) : 398 - 403
12345