Use of CFD to Investigate Flow Characteristics and Oil Distribution Inside an Oil-injected Screw Compressor

被引：5
|
作者：
Zhang, J. W. [1 ]
Wu, Y. R. [2 ]
Hsieh, S. H. [1 ]
Huang, C. S. [1 ]
机构：
[1] Hanbell Precise Machinery Co Ltd, Taoyuan, Taiwan
[2] Natl Cent Univ, Dept Mech Engn, Taoyuan, Taiwan
来源：
INTERNATIONAL CONFERENCE ON COMPRESSORS AND THEIR SYSTEMS 2019 | 2019年 / 604卷
关键词：
D O I：
10.1088/1757-899X/604/1/012016
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The well-developed CAE tools are used to investigate flow characteristics and oil distribution inside an oil-injected screw compressor. The flow field of gas mixed with oil is calculated by ANSYS CFX. TwinMesh generates high quality hexahedral grids for the compression chambers. There are two cases studied in this study. In the first case, the compressor models under four loading conditions are analyzed. The pressure curve is used to see if the designed built-in volume index is appropriate. In the second case, the compressor models under oil-free and oil-injected conditions are analyzed. The pressure gradients on rotor surfaces and velocity vector fields are used to describe the effects of lubrication and sealing in the sealing line gap, the tip gap, and the outlet end gap of rotors. The designer could optimize the slider and know if the oil is properly distributed in each gap.
引用
收藏
页数：10
相关论文
共 50 条
  • [1] CFD simulation for the internal pressure characteristics of an oil-injected twin-screw refrigeration compressor
    Yang, Shengmei
    Ouyang, Hua
    Wu, Yadong
    Wang, Lee
    Mei, Lu
    Wang, Hongdan
    [J]. INTERNATIONAL JOURNAL OF REFRIGERATION, 2021, 126 : 143 - 154
  • [2] Performance analysis of an oil-injected screw compressor and its application
    Muroran Inst of Technology, Hokkaido, Japan
    [J]. Int J Refrig, 4 (220-227):
  • [3] PERFORMANCE ANALYSIS OF AN OIL-INJECTED SCREW COMPRESSOR AND ITS APPLICATION
    FUJIWARA, M
    OSADA, Y
    [J]. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 1995, 18 (04): : 220 - 227
  • [4] Heat transfer in an oil-injected screw compressor and in its discharge pipe
    Hammerl, Klaus
    Moser, Johannes
    [J]. American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, 2000, 40 : 91 - 99
  • [5] Choosing Oil-injected Screw Compressors
    Almasi, Amin
    [J]. CHEMICAL ENGINEERING, 2012, 119 (02) : 35 - 39
  • [6] Application of a generalized compressor modeling framework for simulating an oil-injected twin-screw compressor
    Salts, Nicholas
    Ziviani, Davide
    Groll, Eckhard A.
    [J]. INTERNATIONAL CONFERENCE ON COMPRESSORS AND THEIR SYSTEMS 2019, 2019, 604
  • [7] Dynamic modelling and PID loop control of an oil-injected screw compressor package
    Poli, G. W.
    Milligan, W. J.
    McKenna, P.
    [J]. 10TH INTERNATIONAL CONFERENCE ON COMPRESSORS AND THEIR SYSTEMS, 2017, 232
  • [8] Oil level measurement in oil-injected screw compressor packages used in the petroleum, petrochemical, refrigeration and fuel gas markets
    Milligan, W. J.
    Muir, D. I.
    Harrison, D. K.
    [J]. 8TH INTERNATIONAL CONFERENCE ON COMPRESSORS AND THEIR SYSTEMS, 2013, : 77 - +
  • [9] Use of oil-injected screw compressors in a special fuel gas boosting service
    Cummings, J
    [J]. HYDROCARBON PROCESSING, 2004, 83 (12): : 74 - 76
  • [10] Experimental Investigation of the Multiphase Flow in Oil-Injected Multiphase Twin Screw Pumps
    Lottis, Marian
    Deeb, Mohammad
    Luke, Andrea
    [J]. CHEMIE INGENIEUR TECHNIK, 2020, 92 (05) : 619 - 623
12345