SHAKING TABLE TEST OF A STRENGTHENED FULL SCALE STONE MASONRY BUILDING WITH FLEXIBLE DIAPHRAGMS

被引:0
|
作者
Magenes, Guido [1 ]
Penna, Andrea [1 ]
Rota, Maria
Galasco, Alessandro [1 ]
Senaldi, Ilaria
机构
[1] Univ Pavia, I-27100 Pavia, Italy
关键词
Shaking table test; Stone masonry; Full scale; Strengthening strategies; Stiffening of diaphragms;
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
An extensive experimental campaign has been conducted at EUCENTRE in order to understand the dynamic behaviour of historic stone masonry structures and to evaluate the seismic performance of selected strengthening strategies, aiming at improving wall-to-floor connections and in-plane diaphragm stiffness. Shaking table tests were performed of three full-scale two-storey buildings made of undressed double-leaf stone masonry and timber floor and roof. Because of the asymmetric configuration of the buildings, different types of response were observed in the specimens for increasing levels of seismic input. The first prototype exhibited in-plane distortion of the flexible diaphragms and local out-of-plane failure modes were activated. In this paper the characteristics of the strengthening interventions on the second building prototype are described, where the connections between the floor and roof diaphragms and the walls were improved and only a moderate stiffening of the wooden diaphragms was made. The results obtained during the dynamic tests will be illustrated, focusing on the response of the structure, the damage mechanism and its evolution during the tests. The improvement of the connections proved to be very effective, increasing significantly the seismic capacity of the building with respect to the first prototype.
引用
收藏
页码:1621 / 1629
页数:9
相关论文
共 50 条
  • [1] SHAKING TABLE TEST OF A STRENGTHENED FULL-SCALE STONE MASONRY BUILDING WITH FLEXIBLE DIAPHRAGMS
    Magenes, Guido
    Penna, Andrea
    Senaldi, Ilaria Enrica
    Rota, Maria
    Galasco, Alessandro
    INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE, 2014, 8 (03) : 349 - 375
  • [2] Shake-Table Test of a Strengthened Stone Masonry Building Aggregate with Flexible Diaphragms
    Guerrini, Gabriele
    Senaldi, Ilaria
    Graziotti, Francesco
    Magenes, Guido
    Beyer, Katrin
    Penna, Andrea
    INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE, 2019, 13 (07) : 1078 - 1097
  • [3] Assessment of a Full-Scale Unreinforced Stone Masonry Building Tested on a Shaking Table by Inverse Engineering
    Kouris, Leonidas Alexandros S.
    Penna, Andrea
    Magenes, Guido
    BUILDINGS, 2022, 12 (08)
  • [4] Brief Report of Shaking Table Test on Masonry Building Strengthened with Ferrocement Layers
    Boen, Teddy
    Imai, Hiroshi
    Ismail, Febrin
    Hanazato, Toshikazu
    Lenny
    JOURNAL OF DISASTER RESEARCH, 2015, 10 (03) : 551 - 557
  • [5] Shaking table test on unreinforced stone masonry pagoda
    Zhu, Fei
    Wang, Fenglai
    Sun, Xujie
    Zhao, Yan
    PROGRESS IN STRUCTURE, PTS 1-4, 2012, 166-169 : 730 - +
  • [6] Numerical Simulation of Shaking Table Tests on Full-Scale Stone Masonry Buildings
    Penna, Andrea
    Senaldi, Ilaria Enrica
    Galasco, Alessandro
    Magenes, Guido
    INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE, 2016, 10 (2-3) : 146 - 163
  • [7] Dataset from the dynamic shake-table test of a full-scale unreinforced clay-masonry building with flexible timber diaphragms
    Kallioras, Stylianos
    Guerrini, Gabriele
    Tomassetti, Umberto
    Peloso, Simone
    Graziotti, Fracesco
    DATA IN BRIEF, 2018, 18 : 629 - 640
  • [8] Shaking table test on a full scale URM cavity wall building
    F. Graziotti
    U. Tomassetti
    S. Kallioras
    A. Penna
    G. Magenes
    Bulletin of Earthquake Engineering, 2017, 15 : 5329 - 5364
  • [9] Shaking table test on a full scale URM cavity wall building
    Graziotti, F.
    Tomassetti, U.
    Kallioras, S.
    Penna, A.
    Magenes, G.
    BULLETIN OF EARTHQUAKE ENGINEERING, 2017, 15 (12) : 5329 - 5364
  • [10] A Shaking Table Test Design on Seismic Strengthened Brick Masonry Structures
    Liu Jie Ping
    Liu Chen
    Zhang Ling Xin
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON ADVANCED DESIGN AND MANUFACTURING ENGINEERING, 2015, 39 : 568 - 574