OPTIMIZATION OF HYDROGEN UTILIZATION RATIO IN HYDROGEN FILLING STATIONS

被引：0
|
作者：
Chen, Honggang [1 ]
Zheng, Jinyang [1 ]
Liu, Yanlei [1 ]
Xu, Ping
Li, Lei [1 ]
Liu, Pengfei [1 ]
Bie, Haiyan [1 ]
机构：
[1] Zhejiang Univ, Inst Chem Machinery & Proc Equipment, Hangzhou 310003, Zhejiang, Peoples R China
来源：
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 1 | 2009年
关键词：
hydrogen filling station; hydrogen utilization ratio; optimization; single stage filling; multistage filing;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
High pressure hydrogen storage is widely used in hydrogen filling stations and fuel cell automobiles. Currently, single filling is the main method for hydrogen transfer from stationary storage tanks to cylinders of fuel cell automobiles. Along with the wide application of hydrogen the multistage filling will be adopted in hydrogen filling stations due to its high hydrogen utilization ratio. The hydrogen utilization ratio of single or multistage filling can be determined by various parameters such as the pressure and volume of the stationary tanks and cylinders of fuel cell automobiles. In this research, the utilization ratios of hydrogen in different filling methods are analyzed using the algorithm established in this article based on the real gas law of hydrogen and the corresponding hydrogen utilization ratios are obtained. The results show that it can be significantly improved using multistage filling method and reaches a maximum as the ratio of the volume of higher-pressure stationary tank to the lower one is 0.5.
引用
收藏
页码：519 / 524
页数：6
相关论文
共 50 条
  • [1] An optimized control method for a high utilization ratio and fast filling speed in hydrogen refueling stations
    Zheng, Jinyang
    Ye, Jianjun
    Yang, Jian
    Tang, Ping
    Zhao, Lei
    Kern, Maradee
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (07) : 3011 - 3017
  • [2] Safety distances for hydrogen filling stations
    RIVM Centre for External Safety, Bilthoven, Netherlands
    [J]. Fuel Cells Bull., 2006, 11 (12-16):
  • [3] Safety distances for hydrogen filling stations
    Matthijsen, A. J. C. M.
    Kooi, E. S.
    [J]. JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES, 2006, 19 (06) : 719 - 723
  • [4] Handling of liquid hydrogen at filling stations
    Wetzel, FJ
    [J]. HYDROGEN ENERGY PROGRESS XI, VOLS 1-3, 1996, : 1123 - 1134
  • [5] Suggestions to Constructing Hydrogen Filling Stations in China
    WANG Ju
    [J]. 中国汽车, 2005, (03) : 15 - 16
  • [6] Prospects for implementation of hydrogen filling stations in the Russian Federation*
    Marin, G. E.
    Titov, A. V.
    Akhmetshin, A. R.
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 78 : 901 - 906
  • [7] A tool to optimize the initial distribution of hydrogen filling stations
    Schwoon, Malte
    [J]. TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, 2007, 12 (02) : 70 - 82
  • [8] Optimization and control of hydrogen and energy flows in a Green Hydrogen Refuelling Stations
    Dagdougui, Hanane
    Ouammi, Ahmed
    Sacile, Roberto
    [J]. 2011 IEEE INTERNATIONAL SYSTEMS CONFERENCE (SYSCON 2011), 2011, : 80 - +
  • [9] Optimization on volume ratio of three-stage cascade storage system in hydrogen refueling stations
    Yu, Yehong
    Lu, Chen
    Ye, Sheng
    Hua, Zhengli
    Gu, Chaohua
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2022, 47 (27) : 13430 - 13441
  • [10] Coupled hydrogen moderator optimization with ortho/para hydrogen ratio
    Kai, T
    Harada, M
    Teshigawara, M
    Watanabe, N
    Ikeda, Y
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2004, 523 (03): : 398 - 414
12345