Finite element analysis of non-isothermal warm deep drawing of dual phase steel

被引：1
|
作者：
Pepelnjak, T. [1 ]
Kaftanoglu, B. [2 ,3 ]
机构：
[1] Univ Ljubljana, Fac Mech Engn, Forming Lab, Ljubljana, Slovenia
[2] ATILIM Univ, Dept Mfg Engn, Ankara, Turkey
[3] ATILIM Univ, Met Forming Ctr Excellence, Ankara, Turkey
来源：
NUMIFORM 2016: THE 12TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES | 2016年 / 80卷
关键词：
HIGH-STRENGTH STEELS; AHSS; LUBRICANTS; SIMULATION; COATINGS; SHEETS;
D O I：
10.1051/matecconf/20168014003
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Improving the formability of the material is an important issue in the deep drawing process. Heating the material above its recrystallization temperature drastically increases formability but in the case of dual phase (DP) steels it results in the loss of their mechanical properties. To improve the drawing ratio, only the heating of the flange region in the warm temperature range up to 300 degrees C was studied on DP600 sheet steel by numerical simulation. Thermo-elastic-plastic FEM analysis of deep drawing at several drawing ratios was performed and compared with experimental results.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Analysis of non-isothermal warm deep drawing of dual-phase DP600 steel
    Pepelnjak, T.
    Kayhan, E.
    Kaftanoglu, B.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2019, 12 (02) : 223 - 240
  • [2] Analysis of non-isothermal warm deep drawing of dual-phase DP600 steel
    T. Pepelnjak
    E. Kayhan
    B. Kaftanoglu
    [J]. International Journal of Material Forming, 2019, 12 : 223 - 240
  • [3] Finite element analysis and formability of non-isothermal deep drawing of AZ31B sheets
    Huang, Tyng-Bin
    Tsai, Yung-An
    Chen, Fuh-Kuo
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 177 (1-3) : 142 - 145
  • [4] Finite element analysis of the formability of an austenitic stainless steel sheet in warm deep drawing
    Takuda, H
    Mori, K
    Masachika, T
    Yamazaki, E
    Watanabe, Y
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 : 242 - 248
  • [5] Finite Element Analysis on Non-isothermal Glass Molding
    Zhu, Kejun
    Yin, Shaohui
    Yu, Jianwu
    Zhu, Yongjian
    Jin, Song
    Wang, Yufang
    He, Jianjie
    [J]. ULTRA-PRECISION MACHINING TECHNOLOGIES, 2012, 497 : 240 - 244
  • [6] Experimental investigation of non-isothermal deep drawing of DP600 steel
    Erdem Kayhan
    Bilgin Kaftanoglu
    [J]. The International Journal of Advanced Manufacturing Technology, 2018, 99 : 695 - 706
  • [7] Experimental investigation of non-isothermal deep drawing of DP600 steel
    Kayhan, Erdem
    Kaftanoglu, Bilgin
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (1-4): : 695 - 706
  • [8] Experimental investigation of non-isothermal deep drawing of DP600 steel
    [J]. Kayhan, Erdem (erdem.kayhan@atilim.edu.tr), 1600, Springer London (99): : 1 - 4
  • [9] Development of Forming Temperature Curves for Warm Deep Drawing Process Under Non-isothermal Conditions
    Cetin, M. Huseyin
    Ugur, Abdullah
    Yigit, Osman
    Gokkaya, Hasan
    Arcaklioglu, Erol
    [J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2015, 40 (09) : 2763 - 2784
  • [10] Development of Forming Temperature Curves for Warm Deep Drawing Process Under Non-isothermal Conditions
    M. Huseyin Cetin
    Abdullah Ugur
    Osman Yigit
    Hasan Gokkaya
    Erol Arcaklioglu
    [J]. Arabian Journal for Science and Engineering, 2015, 40 : 2763 - 2784
12345