Oligo(lactic acid)-grafted starch: A compatibilizer for poly(lactic acid)/thermoplastic starch blend

The objective of this study was to improve the compatibility between poly(lactic add) (PLA) and thermoplastic starch (TPS) in PLA/TPS blown films by incorporating oligo( lactic add)-grafted starch (OLA-g-starch) as a compatibilizer. OIA-g-starch with a degree of substitution of 1.2 and degree of polymerization of 2.0 was synthesized via a ring-opening polymerization of lactide initiated by hydroxyl groups of starch. The PLA/TPS blends containing OLA-g-starch were prepared using a twin-screw extruder with a constant weight proportion of PLA to TPS of 50:50 and various concentrations of OLA-g-starch, i.e., 1,2, 3, and 5%. The obtained blends were blown into thin films using a blown film extruder. SEM confirmed the droplet/matrix morphology of the PLA/TPS blends both with and without OLA-g-starch. Incorporating OLA-g-starch improved the compatibility between the TPS dispersed phase and PLA matrix, as evidenced by the smaller size and better distribution of the TPS phase. As a result, the blends containing OLA-g-starch exhibited up to 280% greater extensibility as well as enhanced water vapor and oxygen barrier properties, water resistance, melt flowability, and thermal stability. The T-g, T-cc, and T-m of PLA in the blends shifted to higher temperatures when OLA-g-starch was incorporated. The obtained PLA/TPS blown film containing OLA-g-starch has the potential to be used as flexible packaging. (C) 2020 Elsevier B.V. All rights reserved.