Evaluating the potential for recycling all PET bottles into new food packaging

被引:31
|
作者
Begley, TH [1 ]
McNeal, TP [1 ]
Biles, JE [1 ]
Paquette, KE [1 ]
机构
[1] US FDA, Washington, DC 20204 USA
来源
关键词
recycled polymers; food packaging; sorption;
D O I
10.1080/02652030110083720
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
To evaluate the feasibility of recycling all PET bottles into food packaging, realistic estimates of the maximum concentration of contaminants that might be expected in the polymer are needed. To estimate the maximum concentration of a contaminant that might be in PET from the storage of non-food substances, sorption experiments into two types of PET were performed. These test materials were 0.8 mm thick amorphous PET (a relative sink for contaminants) and commercial PET bottle wall. Using a commercial shampoo containing 1% lindane (C6H6Cl6), the test materials were stored in contact with the shampoo at 20 and 40degrees C for 231 days. This commercial shampoo also represents an extreme case because it contains 7% acetone, a solvent which swells PET, further enhancing sorption of chemicals. Additional sorption experiments into PET were performed by preparing solutions of 10% toluene in Miglyol (a fractionated coconut oil), 10% benzophenone in Miglyol, 5% 2-butoxyethoxy ethanol (2-BE) in 50/50 water/ethanol, and 10% methyl stearate in heptane. Sorption data from the shampoo into PET illustrate Fickian behaviour. Specifically, the amount of sorption at room temperature is similar to40 tilnes less than that at 40degrees C. The amount of lindane sorbed into PET from the shampoo after 231 days was 0.1 and 3.7 mg dm(-2) at 20 and 40degrees C respectively. These values correspond to 28 and 765 mg kg(-1) on a mass/mass basis. All sorptions are within the ranges measured and published by other authors using surrogate contamination testing schemes. Additionally, actual bottles from recycle bins were analysed for the amount of contamination. Results are discussed in terms of potential consumer exposure to non-food contaminants in food containers made of recycled PET and in relation to the surrogate testing methods recommended by the Food and Drug Administration (FDA) for determining the compatibility of a PET recycling process to produce containers suitable for food-contact use.
引用
收藏
页码:135 / 143
页数:9
相关论文
共 50 条
  • [1] Recycling pet food packaging
    Mills, Georgina
    [J]. VETERINARY RECORD, 2021, 189 (05) : 183 - 183
  • [2] Recycling of PET bottles
    Asano M.
    [J]. Journal of Fiber Science and Technology, 2019, 75 (07): : P365 - P368
  • [3] Recycling of PET Bottles
    Asano, Masahiko
    [J]. SEN-I GAKKAISHI, 2019, 75 (07) : 365 - 368
  • [4] RECYCLING New polyol plant upcycles PET bottles
    McCoy, Michael
    [J]. CHEMICAL & ENGINEERING NEWS, 2020, 98 (42) : 12 - 12
  • [5] RECYCLING PET BOTTLES BY DEPOLYMERIZATION
    MUHS, P
    PLAGE, A
    SCHUMANN, HD
    [J]. KUNSTSTOFFE-GERMAN PLASTICS, 1992, 82 (04): : 289 - 292
  • [6] A New Landscape for PET Recycling: It's not just for bottles anymore
    [J]. Carlin, Conor, 1600, Wiley-Blackwell (76):
  • [7] Recycling of PET soft drink bottles
    Dagley, I
    [J]. FOOD AUSTRALIA, 2004, 56 (11): : 524 - 524
  • [8] Valorization and recycling of packaging belts and post-consumer PET bottles in the manufacture of sand concrete
    Biskri, Yasmina
    Benzerara, Mohammed
    Babouri, Laidi
    Dehas, Ouided
    Belouettar, Redjem
    [J]. FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2022, 16 (62): : 225 - 239
  • [9] Sustainable PET Waste Recycling: Labels from PET Water Bottles Used as a Catalyst for the Chemical Recycling of the Same Bottles
    Enayati, Mojtaba
    Mohammadi, Somayeh
    Bouldo, Martin G.
    [J]. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2023, 11 (46) : 16618 - 16626
  • [10] Petrochemicals from waste: Recycling PET bottles
    Barna, B.A.
    Johnsrud, D.R.
    Lamparter, R.L.
    [J]. Chemical Engineering (New York), 1980, 87 (24): : 50 - 51