Hydraulic fracture initiation for perforated wellbore coupled with the effect of fluid seepage

Hydraulic fracturing technology is one of the most effective well stimulation techniques for low-permeability reservoirs, however, the mechanism of the fracture initiation and propagation is not fully understood. Based on Biot's consolidation theory and linear elasticity theory, this paper develops a general analytical model to investigate the hydraulic fracture initiation from arbitrarily spiral perforation or oriented perforation coupled with the effect of fluid seepage. The analytical solution can be used to determine formation breakdown pressure, the location and direction of an initial crack, and to investigate the factors that affect the formation breakdown pressure and the fracture initiation position. The calculation results show that the direction of fracture initiation does not always align with the direction of the maximum horizontal principal stress and may deviate from the 0 degrees direction of the perforation circumferential angle to the 90 degrees direction. The seepage effect of fracturing fluid can significantly reduce the formation breakdown pressure and increase the possibility of fracture initiation from the tip of perforation. The smaller the formation depth and transfer factor (TF) are, the more favorable the fracture initiation at the tip of the perforation is. With the increase of the Biot coefficient, the formation breakdown pressure decreases significantly. To avoid the failure of cement sheath induced by the fracture initiation from the bottom of perforation, the low-viscosity fracturing fluid with a stronger seepage effect and the casings with harder materials and lower transfer coefficient are recommended. (C) 2022 The Author(s). Published by Elsevier Ltd.