Metallurgical performance of innovative double-parameter oxygen lance in BOF steelmaking

被引：15
|
作者：
Liu, Guangqiang [1 ]
Liu, Kun [1 ]
Han, Peng [1 ]
机构：
[1] Univ Sci & Technol Liaoning, Sch Met & Mat, Anshan 114051, Peoples R China
来源：
IRONMAKING & STEELMAKING | 2021年 / 48卷 / 04期
关键词：
Double-parameter oxygen lance; converter; cavity size; mixing ability; splashing; JET; MODEL; GENERATION; CONVERTER;
D O I：
10.1080/03019233.2020.1806677
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The metallurgical performance of a double-parameter oxygen lance was characterized using the prototype of a 260 t converter. The influences of nozzle arrangement on the cavity size, mixing ability and splashing capacity were discussed. The results demonstrated that the small-nozzle inclination has a greater impact on the cavity diameter, while the large-nozzle flow ratio has a greater impact on the cavity depth. The influence of the large-nozzle gas flow rate on the stirring strength is greater than that of the nozzle inclination. The maximum splash flux is located at the outer edge of the large nozzle farthest from the axis of the lance. The large-nozzle flow of the double-parameter lance shall be limited to less than 65% of the total flow to prevent the molten steel from splashing out of the converter. Many metallurgical indexes were improved by the application of the double-parameter lance under commercial production conditions.
引用
收藏
页码：437 / 446
页数：10
相关论文
共 18 条
  • [1] Jet Behavior and Metallurgical Performance of Innovated Double-Parameter Oxygen Lance in BOF
    YUAN Zhang-fu1
    2. Graduate School ofFrontier Sciences
    3. Steelmaking Plant
    4. Tianjin Iron and Steel Co Ltd
    [J]. Journal of Iron and Steel Research(International), 2007, (03) : 1 - 5
  • [2] Jet behavior and metallurgical performance of innovated double-parameter oxygen lance in BOF
    Yuan Zhang-fu
    Yang Xiao
    Lu Zhi-xing
    Huang Jiang-ning
    Pan Yi-fang
    Ma En-xiang
    [J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2007, 14 (03) : 1 - +
  • [3] Jet Behavior and Metallurgical Performance of Innovated Double-Parameter Oxygen Lance in BOF
    YUAN Z.-f.
    YANG X.
    LU Z.-x.
    HUANG J.-n.
    PAN Y.-f.
    MA E.-x.
    [J]. Journal of Iron and Steel Research International, 2007, 14 (3) : 1 - 6
  • [4] Improving the Design of the Oxygen Lance and the Blowing Regime for BOF Steelmaking in the BOF Shop at the Azovstal Metallurgical Combine
    Sushchenko, A. V.
    Tskitishvili, E. O.
    Sidorchuk, R. S.
    Ligus, N. N.
    Orlichenko, M. P.
    [J]. METALLURGIST, 2014, 57 (9-10) : 804 - 817
  • [5] Improving the Design of the Oxygen Lance and the Blowing Regime for BOF Steelmaking in the BOF Shop at the Azovstal Metallurgical Combine
    A. V. Sushchenko
    E. O. Tskitishvili
    R. S. Sidorchuk
    N. N. Ligus
    M. P. Orlichenko
    [J]. Metallurgist, 2014, 57 : 804 - 817
  • [6] Behaviors of supersonic double-parameter jets and their impingement onto molten bath in BOF steelmaking
    Wang, Xi
    Liu, Guangqiang
    Liu, Kun
    [J]. AIP ADVANCES, 2020, 10 (10)
  • [7] Numerical evaluation of the performance of a BOF steelmaking lance
    Barron, Miguel
    Lopez, Cesar
    Hilerio, Isaias
    [J]. EPD CONGRESS 2008, 2008, : 303 - 310
  • [8] Research and Application of New Oxygen Lance For BOF Steelmaking
    Rao, Jiangping
    Li, Guangqiang
    Yang, Zhizheng
    [J]. ADVANCED MATERIALS AND STRUCTURES, PTS 1 AND 2, 2011, 335-336 : 74 - +
  • [9] Research on coherent jet oxygen lance in BOF steelmaking process
    Lv, Ming
    Zhu, Rong
    [J]. METALLURGICAL RESEARCH & TECHNOLOGY, 2019, 116 (05)
  • [10] Jet characteristics of a double-structure oxygen lance and its interaction with the molten pool in BOF steelmaking
    Jia, Hongbin
    Han, Peng
    Liu, Kun
    Li, Yanxin
    Ba, Kaijie
    Feng, Lianghua
    [J]. AIP ADVANCES, 2021, 11 (08)
12